Views

ckaehlerSandBox

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 21:00, 3 December 2006 by Christian.kaehler (talk | contribs)
Jump to: navigation, search
Construction.png This article or section is currently under construction. In order to avoid editing conflicts, please wait until this message is removed or contact the author (Christian.kaehler 10:53, 29 November 2006 (CET)).

Detect the phone's IP address

Starting point: The phone is connected to the LAN and the boot phase has been completed.

  1. Press the opk-re.png key four times. The display shows:
    05=Setup
  2. Press the opk-ok.png key. The display shows:
    02=Configuration
  3. Press opk-6.png and the admin password (default: opk-1.png opk-2.png opk-3.png opk-4.png opk-5.png opk-6.png). The display shows:
    Config:
    01=Network?
  4. Press the opk-ok.png key and the opk-re.png key to select 02=Terminal IP addr.?.

Open the WBM

  1. You may read the IP address from the local phone menu and use this to switch over to the WBM by using a web browser (Microsoft Internet Explorer recommended).