optiPoint MoH Converting
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
This article or section is currently under construction. In order to avoid editing conflicts, please wait until this message is removed or contact the author (Christian.kaehler 10:53, 29 November 2006 (CET)). |
Music On Hold
If two parties (say 'A' and 'B') have established a call, one of the parties ('B') may try to connect temporarily to a third party ('C'), e.g. for making a consultation call. The other party ('A') is not involved in this new connection, but is put into the "hold" status: Party 'A' is now able to receive audio information (e.g. music or voice) - which is normally done to inform him/her about this "hold" status by playing a so called "Music on Hold (MoH)".
optiPoint IP phones are shipped with a build-in MoH sample, providing MoH at the near end (i.e. the phone that is being held generates the Music on Hold itself.
Providing a customized MoH requires 4 steps:
- Select a source file with the desired voice/speech - pls. note that this is subject to copyright and other legal regulations.
- Install the MoH file generator tool and the SOX tool on a Windows PC.
- Convert the source file: The file format for MoH is proprietary to the optiPoint IP phones and has to be created by running the MoH file generator tool.
- Download the converted file to the phone - as described in the Administration Manual optiPoint 410-420 S family.
The source file has to be in the * WAV format
Transforming the file is done by a little command line tool (MoH file generator) that does three things:
- Performing a command line call to the SOX tool for transforming the audio data
- adding some information elements specific to the optiPoint phones
- merging this data into a result file
The following screen shot shows an example for calling the MoH file generator for converting a file ('source.wav') into the result file ('out1.wav').