Difference between revisions of "Send URL"

Revision as of 15:37, 19 January 2017

You are here:

Home  Devices  OpenScape Desk Phone CP  Send URL

Introduction

The Send URL function on the OpenScape Desk Phone CP devices, allows a user to send a predefined HTTP or HTTPS request to a server in order to trigger a remote action. The functionality is available from a free programmable key (FPK), that has been configured for this feature. In the server response to a phones HTTP or HTTPS request, the phone can be triggered to (e.g.)

• turn on the LED of the configured FPK (in different colours)
• use a different blinking mode
• overwrite the FPK label (CP600 only)

Technical details

• The request can be sent in plain HTTP or encrypted HTTPS
• The request can be of type GET or POST
• The phone will not follow any type of redirect (3XX)
• Authentication User ID and password will be sent as Parameters (no HTTP Basic Authentication)
• When using HTTPS, the connected server can be validated according to the Authentication Policy (see Administration Guide)

Configuration

A Send URL FPK can be configured via web based management or DLS. Please see example screenshot from WBM.

WBM ’Send URL FPK’ configuration

This FPK (if pressed) will trigger the following request

 https://10.10.0.255:443/?userid=MyUsername&password=MyPassword&id=1&item=2&ipaddress=<IP-OF-DEVICE>&phonenumber=<E164-OF-DEVICE>&devicetype=OpenStage&symbn=MySymbolicName

The parts of the URL linked to the configuration items can be seen in the following table

Server response

In order to make use of the Send URL FPK specific features (LED colour and blink mode), the server needs to reply with a specific XML content. Also the HTTP header needs to contain the 'Content-Type', which is 'text/xml'. The HTTP response code needs to be 200, in order for the CP phone to process the XML body.

There is a special handling of server responses, which have a response code of 200, but an empty or invalid XML body. In this case, the Desk Phone CP will make it's LED lid green for 3 seconds and then turn it off again. This can be interesting for using the Desk Phone CP with IoT services like IFTTT or Zapier.

 <Batch>
 <Capabilities_Req TYPE="ALL_OF">
 <Capability NAME="XML_LED_STATE_CONTROL" />
 </Capabilities_Req>
 <Remote_Control>
 <Turnled ID="MySymbolicName" WAKE="FALSE" STATE="FLASH" COLOUR="GREEN" LABEL="FPK label" />
 </Remote_Control>
 </Batch>

The interesting part for a Send URL application developer is the <Turnled> element. Let's see the different attributes and their possible values.