Difference between revisions of "Send URL"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
| Line 22: | Line 22: | ||
This FPK (if pressed) will trigger the following request | This FPK (if pressed) will trigger the following request | ||
| − | https://10.10.0.255:443/?userid=MyUsername&password=MyPassword&id=1&item=2&ipaddress=<IP-OF-DEVICE>&phonenumber=<E164-OF-DEVICE>&devicetype=OpenStage&symbn=MySymbolicName | + | {{#tag:nowiki|https://10.10.0.255:443/?userid=MyUsername&password=MyPassword&id=1&item=2&ipaddress=<IP-OF-DEVICE>&phonenumber=<E164-OF-DEVICE>&devicetype=OpenStage&symbn=MySymbolicName}} |
| + | |||
| + | The parts of the URL linked to the configuration items can be seen in the following table | ||
| + | |||
| + | {| {{DefaultTable}} | ||
| + | |- | ||
| + | ! width="150" | URL part | ||
| + | ! width="200" | Configuration Item | ||
| + | ! width="300" | Example Value | ||
| + | |- | ||
| + | | Method | ||
| + | | Method | ||
| + | | GET | ||
| + | |- | ||
| + | | Protocol | ||
| + | | Protocol | ||
| + | | https | ||
| + | |- | ||
| + | | Hostname | ||
| + | | Web server address | ||
| + | | 10.10.0.255 | ||
| + | |- | ||
| + | | Port | ||
| + | | Port | ||
| + | | 443 | ||
| + | |- | ||
| + | | Path | ||
| + | | Path | ||
| + | | / | ||
| + | |- | ||
| + | | Parameter | ||
| + | | Parameters | ||
| + | | id=1&item=2 | ||
| + | |- | ||
| + | | Parameter | ||
| + | | Web server user ID | ||
| + | | userid=MyUsername | ||
| + | |- | ||
| + | | Parameter | ||
| + | | Web server password | ||
| + | | password=MyPassword | ||
| + | |- | ||
| + | | Parameter | ||
| + | | Symbolic name | ||
| + | | symbn=MySymbolicName | ||
| + | |} | ||
Revision as of 14:45, 19 January 2017
|
You are here: |
 Home Devices OpenScape Desk Phone CP Send URL
|
Introduction
The Send URL function on the OpenScape Desk Phone CP devices, allows a user to send a predefined HTTP or HTTPS request to a server in order to trigger a remote action. The functionality is available from a free programmable key (FPK), that has been configured for this feature. In the server response to a phones HTTP or HTTPS request, the phone can be triggered to (e.g.)
- turn on the LED of the configured FPK (in different colours)
- use a different blinking mode
- overwrite the FPK label (CP600 only)
Technical details
- The request can be sent in plain HTTP or encrypted HTTPS
- The request can be of type GET or POST
- The phone will not follow any type of redirect (3XX)
- Authentication User ID and password will be sent as Parameters (no HTTP Basic Authentication)
- When using HTTPS, the connected server can be validated according to the Authentication Policy (see Administration Guide)
Configuration
A Send URL FPK can be configured via web based management or DLS. Please see example screenshot from WBM.
This FPK (if pressed) will trigger the following request
https://10.10.0.255:443/?userid=MyUsername&password=MyPassword&id=1&item=2&ipaddress=<IP-OF-DEVICE>&phonenumber=<E164-OF-DEVICE>&devicetype=OpenStage&symbn=MySymbolicName
The parts of the URL linked to the configuration items can be seen in the following table
| URL part | Configuration Item | Example Value |
|---|---|---|
| Method | Method | GET |
| Protocol | Protocol | https |
| Hostname | Web server address | 10.10.0.255 |
| Port | Port | 443 |
| Path | Path | / |
| Parameter | Parameters | id=1&item=2 |
| Parameter | Web server user ID | userid=MyUsername |
| Parameter | Web server password | password=MyPassword |
| Parameter | Symbolic name | symbn=MySymbolicName |
