Difference between revisions of "optiPoint 150 S Release Notes"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
(→What’s New?) |
Gunnar.boll (talk | contribs) (→V1.26) |
||
Line 10: | Line 10: | ||
* Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k) | * Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k) | ||
* IP: Phone send ARP requests to IP: 192.1.1.49 | * IP: Phone send ARP requests to IP: 192.1.1.49 | ||
+ | |||
+ | {| {{DefaultTable}} | ||
+ | ! Internal ID | ||
+ | ! Cluster | ||
+ | ! Problem | ||
+ | ! Comment | ||
+ | |- | ||
+ | | 400 | ||
+ | | HP3k | ||
+ | | No Ringback tone when calling Upoe or HFA phone @ HP3k | ||
+ | | complies now to RFC 3960 sect 3.2 | ||
+ | |- | ||
+ | | 392 | ||
+ | | Admin | ||
+ | | Possible to configure Call forwarding at the phone when connected to HP3k, HP4k) | ||
+ | | Now neither WBM nor local admin can configure CF in this case (correct!) | ||
+ | |- | ||
+ | | V1.24 | ||
+ | | 07/21/2006 | ||
+ | | [[optiPoint 150 S Release Notes#V1.24|Release Note for V1.24]] | ||
+ | | {{File-DL|oP150S_v124|img}} | ||
+ | |- | ||
+ | | V1.23 | ||
+ | | 07/14/2006 | ||
+ | | [[optiPoint 150 S Release Notes#V1.23|Release Note for V1.23]] | ||
+ | | {{File-DL|oP150S_v123|img}} | ||
+ | |- | ||
+ | | V1.22 | ||
+ | | 05/10/2006 | ||
+ | | - | ||
+ | | {{File-DL|oP150S_v122|img}} | ||
+ | |} | ||
== V1.25 == | == V1.25 == |
Revision as of 17:27, 2 September 2006
The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S ( optiPoint 150 S).
Contents
V1.26
What’s New?
- IP: New L3-QoS default parameters: Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
Fixed Bugs
- HiPath 3000: No Ringback tone when calling Upoe or HFA phone
- Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k)
- IP: Phone send ARP requests to IP: 192.1.1.49
Internal ID | Cluster | Problem | Comment |
---|---|---|---|
400 | HP3k | No Ringback tone when calling Upoe or HFA phone @ HP3k | complies now to RFC 3960 sect 3.2 |
392 | Admin | Possible to configure Call forwarding at the phone when connected to HP3k, HP4k) | Now neither WBM nor local admin can configure CF in this case (correct!) |
V1.24 | 07/21/2006 | Release Note for V1.24 | oP150S_v124 |
V1.23 | 07/14/2006 | Release Note for V1.23 | oP150S_v123 |
V1.22 | 05/10/2006 | - | oP150S_v122 |
V1.25
Fixed Bugs
- General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
V1.24
What’s New?
- Support of DNS query SRV (DNS_SRV)
- Support DNS TTL
- Support RFC 3264 Hold for Broadsoft
Fixed Bugs
- General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
- General: Loud tone when call disconnected
- General: Calltransfer not possible after toggle between calls
- LAN: phone doesn’t register, if L2 QoS value is set
- LAN: VLAN ID can’t be reset to None
- HiPath 3000: Toggle between calls not possible
- HiPath 3000: Busy tone after attended Call transfer
- HiPath 3000: HP3k-HP3k trunking, no payload after transfer
- Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
Known & Open Issues
- HiPath 3000: Blind (semi-attended) transfer doesn’t work
- Not possible to dial, after first call was made with Hook on
- Symmetric use of UDP ports (planned for V1.25)
V1.23
What’s New?
- Telnet port disabled
- Distinctive Ringing (Sylantro) supported