Revision as of 10:12, 22 September 2010

Preparation

Power Supply

Power over Ethernet

The following phone configurations can be operated with PoE, provided that the switch has the appropriate power class:

Model / Configuration	Power Class
OpenStage 15 (includes 1 Key Module 15)	1
OpenStage 20 E	1
OpenStage 20	1
OpenStage 20 G	2
OpenStage 40 (includes 1 Key Module)	2
OpenStage 40 + 2nd Key Module	2
OpenStage 40 G	3
OpenStage 40 G + 2nd Key Module	3
OpenStage 60/80 (includes 1 Key Module + USB-Extension with Acoustic Unit)	3
OpenStage 60/80 + 2nd Key Module	3
OpenStage 60/80 G (includes 1 Key Module + USB-Extension with Acoustic Unit)	3

External Power Supply

For an OpenStage 60/80 G with a 2nd Key Module, an external power unit is required. The order no. for the plug-in power supply is region specific:

EU: C39280-Z4-C510
UK: C39280-Z4-C512
USA: C39280-Z4-C511

Energy Saving

OpenStage phones offer an energy saving mode. The display backlight is switched off after a configurable timeout. With OpenStage 40, the main display and key module backlight will be switched off after 90 seconds of inactivity (firmware version V2R0 onwards). Readability even without backlight is ensured by the transflective display. With OpenStage 60 and 80, the timer is configurable by the administrator (Local Functions > Energy saving); the timeout ranges between 2 and 8 hours.

Connecting to an IP Network

802.1x

OpenStage phones support 802.1x EAP-TLS. Certificates for authentication can be downloaded via the WPI.

LLDP-MED

OpenStage SIP phones support the layer 2 protocol LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery). When an OpenStage phone is connected to a switch with LLDP-MED capabilities, the phone is able to

advertise and receive a VLAN ID,
advertise and receive QoS parameters,
advertise the power requirements to the LAN access switch by means of an "Extended Power via MDI" TLV.

LLDEP-MED usage is configured in the administratio menu under Network > IP configuration.

DHCP

Plug & Play – One Step Provisioning and Configuration

Provisioning via the WPI (WorkPoint Interface)

Plug & Play / Autoprovisioning

If a Firewall or NAT get in the Way

Using OpenStage@Asterisk

Feature Table

In this table, you find information on all features which are supported by OpenStage phones connected to an Asterisk PBX.

Phone Applications
Feature	Phone with firmware version ≥	Short Description	Further Information
Local Phone Book	OpenStage 60/80 ≥ V1 R5.6.0 OpenStage 40 ≥ V2R1	Stores names and call numbers locally on the phone.	OpenStage_Phone_Book_Application
LDAP	OpenStage 60/80 ≥ V1 R5.6.0 OpenStage 40 ≥ V2R1	The phone can be used to retrieve call numbers or other address data from an LDAP directory.	LDAP on OpenStage
Call Log	OpenStage 15/20/40/60/80 ≥ V1 R5.6.0	Stores a list of missed, dialed, received, and forwarded calls.	-
MWI	OpenStage 15/20/40/60/80 ≥ V1 R5.6.0	Message Waiting Indication. The user is notified of new and old voicemail messages.	-
Help	OpenStage 60/80 ≥ V1 R5.6.0	Quick reference which is shown on the phone display.	-
XML Application Platform	OpenStage 60/80 ≥ V1 R5.6.0	XML-based interface to the phone which allows for developing interactive applications. The phone acts as a front-end for a server-side program.	SEN Developer Portal
CTI Applications	OpenStage 15/20/40/60/80 ≥ V1 R5.6.0	Allows a computer to interact with the phone, e.g. in setting up and terminating calls via a PC application.	OpenStage_CTI_Applications
FPK (Free Programmable Keys)	OpenStage 15/40/60/80 ≥ V1 R5.6.0	These keys can be associated with special phone functions.	OpenStage_Free_Programmable_Keys
Call Related Features
Busy Lamp Field (BLF)	OpenStage 15/40/60/80 ≥ V1 R5.6.0	This function offers the possibility to monitor another extension, and to pick up calls for the monitored extension. The LED of the key will indicate the state of the extension monitored.	Asterisk Feature Busy Lamp Field (BLF)
Phone Based Conference	OpenStage 15/40/60/80 ≥ V1 R5.6.0	The phone establishes and controls a 3-way conference.	-
Voice Mail	OpenStage 15/40/60/80 ≥ V1 R5.6.0	The user can contact the Asterisk voice mail service by means of the messages key.	-
Call Group	-	-	-
Call Pickup	OpenStage 15/40/60/80 ≥ V1 R5.6.0	The BLF function offers the possibility to pick up calls for a monitored extension. The LED of the key will indicate the state of the extension monitored.	Asterisk Feature Busy Lamp Field (BLF)
Call Forward	OpenStage 15/20/40/60/80 ≥ V1 R5.6.0	The user can forward a call to a specified destination.	-
Call Waiting	-	-	-
Do Not Disturb (DND)	OpenStage 15/20/40/60/80 ≥ V1 R5.6.0	If this feature is activated, incoming calls will not be indicated to the user.	-
CFBS, CFNR, CFU	-	-	-
Call Transfer	-	-	-
CheSe	-	-	-
Local three party confernce	-	-	-
DTMF	-	-	-
Alternate Call	-	-	-
Call Hold	-	-	-
MWI	-	-	-
Mobility	-	-	-
Consultation	-	-	-
CCBS	-	-	-
CCNR	-	-	-
CLIP	-	-	-
CLIR	-	-	-
TAPI	-	-	-
Local Music on Hold	-	-	-

@@ Line 67: / Line 67: @@
 === LLDP-MED ===
+OpenStage SIP phones support the layer 2 protocol LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery). When an OpenStage phone is connected to a switch with LLDP-MED capabilities, the phone is able to
+* advertise and receive a VLAN ID,
+* advertise and receive QoS parameters,
+* advertise the power requirements to the LAN access switch by means of an "Extended Power via MDI" TLV.
+LLDEP-MED usage is configured in the administratio menu under '''Network''' > '''IP configuration'''.
 === DHCP ===

Views

Difference between revisions of "SIP Devices and Asterisk"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 10:12, 22 September 2010

Contents