Difference between revisions of "ckaehlerSandBox"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (/draft/) |
m |
||
| Line 7: | Line 7: | ||
Starting point: The phone is connected to the LAN and the boot phase has been completed. | Starting point: The phone is connected to the LAN and the boot phase has been completed. | ||
| − | # Press the [[Image:opk-re.png]] key four times. The display shows:<br><code>05= | + | # Press the [[Image:opk-re.png]] key four times. The display shows:<br><code>05=Setup</code><br> |
# Press the [[Image:opk-ok.png]] key. The display shows:<br><code>02=Configuration</code><br> | # Press the [[Image:opk-ok.png]] key. The display shows:<br><code>02=Configuration</code><br> | ||
# Press [[Image:opk-6.png]] and the admin password (default: [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]]). The display shows:<br><code>Config:</code><br><code>01=Network?</code> | # Press [[Image:opk-6.png]] and the admin password (default: [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]]). The display shows:<br><code>Config:</code><br><code>01=Network?</code> | ||
# Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?</code>. | # Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?</code>. | ||
| − | |||
| + | == Open the [[WBM]] == | ||
| + | # You may read the IP address from the local phone menu and use this to switch over to the [[WBM]] by using a web browser (Microsoft Internet Explorer recommended). | ||
| + | : [[Image:optiPoint_SIP_SecurtiyAlert.JPG|none|thumb|Security Alert]] | ||
[[Category:optiPoint]] | [[Category:optiPoint]] | ||
[[Category:Configuration]] | [[Category:Configuration]] | ||
Revision as of 21:00, 3 December 2006
|
This article or section is currently under construction. In order to avoid editing conflicts, please wait until this message is removed or contact the author (Christian.kaehler 10:53, 29 November 2006 (CET)). |
Detect the phone's IP address
Starting point: The phone is connected to the LAN and the boot phase has been completed.
- Press the
key four times. The display shows:05=Setup - Press the
key. The display shows:02=Configuration - Press
and the admin password (default: 
). The display shows:Config:01=Network? - Press the key and the key to select
02=Terminal IP addr.?.
Open the WBM
- You may read the IP address from the local phone menu and use this to switch over to the WBM by using a web browser (Microsoft Internet Explorer recommended).
- File:optiPoint SIP SecurtiyAlert.JPGSecurity Alert
