Difference between revisions of "Asterisk Feature Busy Lamp Field (BLF)"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
m (→Technical Background) |
Hans.zeiner (talk | contribs) (→Using the FPK) |
||
| (4 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | The busy lamp feature allows users to monitor the dialog state of another phone/user extension. This is indicated by the | + | The busy lamp feature allows users to monitor the dialog state of another phone/user extension. This is indicated by the [[LED]]s in an [[FPK]]. In the [[Asterisk]] community, this feature is called "Busy Lamp Field"; sometimes the term 'Direct Station Selection' is used for the same functionality. |
The feature is available for [[OpenStage]] 40/60/80. | The feature is available for [[OpenStage]] 40/60/80. | ||
| Line 7: | Line 7: | ||
== For Users == | == For Users == | ||
| − | The basic Busy Lamp | + | The basic Busy Lamp Field feature allows the user to monitor the dialog state of another phone. The dialog state is shown by a distinct LED behavior: |
* LED '''off''' -> Watched extension is '''idle''' | * LED '''off''' -> Watched extension is '''idle''' | ||
| Line 17: | Line 17: | ||
'''Example:''' | '''Example:''' | ||
| − | There are four users: Leo, Alice, Joe and Bob. Leo is watching the extensions of Alice, Bob and Joe. Each of the extensions | + | There are four users: Leo, Alice, Joe and Bob. Leo is watching the extensions of Alice, Bob and Joe. Each of the extensions is configured on an specific FPK. The example shows the three different extension statuses. Joe is talking to another persion, Alice gets a call, her phone is ringing and Bob is in idle state, like Leo. The following picture illustrates this example: |
[[Image:FPKBLFStatus.gif|thumb|left|300px|Extension status on FPK: Joe is in busy state, Alice is in ringing state, and Bob is in idle state]]<br clear="left"/> | [[Image:FPKBLFStatus.gif|thumb|left|300px|Extension status on FPK: Joe is in busy state, Alice is in ringing state, and Bob is in idle state]]<br clear="left"/> | ||
| Line 27: | Line 27: | ||
The OpenStage phone supports the BLF functionality in two different FPK function types. | The OpenStage phone supports the BLF functionality in two different FPK function types. | ||
| − | The | + | The BLF type can be used in scenarios where team members want to pick up the call for other team members. |
| − | The | + | The server feature type can be used in receptions, for example, where the receptionist wants to see the call status of all employees, but never wants to pick up the call for someone. |
Depending on the configured type and the status of the observed party, different actions are performed. | Depending on the configured type and the status of the observed party, different actions are performed. | ||
| Line 46: | Line 46: | ||
|- | |- | ||
|On | |On | ||
| − | | | + | |Watched party is called |
|- | |- | ||
|} | |} | ||
Latest revision as of 13:59, 3 August 2016
The busy lamp feature allows users to monitor the dialog state of another phone/user extension. This is indicated by the LEDs in an FPK. In the Asterisk community, this feature is called "Busy Lamp Field"; sometimes the term 'Direct Station Selection' is used for the same functionality.
The feature is available for OpenStage 40/60/80.
The feature description uses always the same example background with fixed names, numbers and IP addresses. The example configuration can be found in Asterisk Feature Example Configuration.
Contents
For Users
The basic Busy Lamp Field feature allows the user to monitor the dialog state of another phone. The dialog state is shown by a distinct LED behavior:
- LED off -> Watched extension is idle
- LED blinking -> Watched extension is ringing
- LED on -> Watched extension is busy/connected
In the basic configuration, pressing the FPK will call the monitored person in any call state.
Example:
There are four users: Leo, Alice, Joe and Bob. Leo is watching the extensions of Alice, Bob and Joe. Each of the extensions is configured on an specific FPK. The example shows the three different extension statuses. Joe is talking to another persion, Alice gets a call, her phone is ringing and Bob is in idle state, like Leo. The following picture illustrates this example:
Leo can see the status of the other people at any time by watching the LEDs on the FPK.
Using the FPK
The OpenStage phone supports the BLF functionality in two different FPK function types.
The BLF type can be used in scenarios where team members want to pick up the call for other team members.
The server feature type can be used in receptions, for example, where the receptionist wants to see the call status of all employees, but never wants to pick up the call for someone.
Depending on the configured type and the status of the observed party, different actions are performed.
BLF Type:
| LED Status | Action by Key Press |
|---|---|
| Off | Watched party is called |
| Blinking | Incoming call for watched person is picked up |
| On | Watched party is called |
Server Feature Type:
| LED Status | Action by Key Press |
|---|---|
| Off | Watched party is called |
| Blinking | Watched party is called |
| On | Watched party is called |
For Administrators
Configuring the "BLF" Type
To assign the BLF function to the FPK, proceed as follows:
Open the web interface and navigate to
Administrator Pages > System > Features > Program Keys.
Select the BLF option and press edit.
Now, configure the parameters for the BLF feature:
Key label - This is the label of the selected FPK
Monitored Phone - This is the SIP URI/phone number of the monitored phone
Audible Alert - This checkbox activates a short beep/ringing alert, if LED status changes to blinking
Popup on alert - This checkbox activates a popup message, if LED status changes to blinking
Example:
If Bob has the extension number "222", the parameters will be:
Key label - "Bob"
Monitored Phone - "222"
Audible Alert - "yes": a short beep or ringing tone sounds when Bob gets a call.
Popup on alert - "yes": a popup is shown when Bob gets a call.
Remark:
It might be necessary to configure a BLF pickup code to ensure that the pickup functionality will be started at Asterisk. This can be done at
Administrator Pages > System > Features > Services:
Configuring the "Server Feature" Type
To assign the Server Feature function to the FPK, proceed as follows:
Open the web interface and navigate to
Administrator Pages > System > Features > Program Keys:
Select the Server Feature option and press edit.
Now, configure the parameters for the BLF feature:
Key label - This is the label of the selected FPK.
Feature Code - This code is sent within an INVITE message when the key is pressed in idle status.
DTMF Digits - These Digits are sent as DTMF signals when the key is pressed during a call.
LED control - A subscription is sent to the given URL.
Example:
If Bob has the extension number "222", the parameters will be:
Key label - "Bob"
Feature Code - "222": pressing the FPK will always call Bob, independent of his line status.
DTMF Digits - not neccessary in this feature.
LED control - "222@192.168.6.10", a subscription for the LED will be sent to the server with the IP address 192.168.6.10. If no IP address is specified here, the request will be automatically sent to the SIP server configured for this phone under System > Registration.
Technical Background
The BLF feature gives the user the possiblity to watch the dialog state of other users. The feature is implemented according to RFC 4235. This document defines a dialog event package for the SIP Events architecture, along with the data format used in notifications for this package. The dialog package allows users to subscribe to state changes relating to another user. When the subscription is made, the user will receive a notification as soon as the state of an INVITE-initiated dialog on the other user's side changes.
The framework is started with an initial subscription from the watching phone. The following table shows the subscription from Leo for Joe's extension:
| 192.168.0.247 | 192.168.0.10 | SIP Message |
|---|---|---|
| Request: SUBSCRIBE | SIP: Request: SUBSCRIBE sip:333@192.168.0.10:5060 | |
| Joe's phone ------------------> Asterisk | ||
| Status: 401 Unauthorized | SIP: Status: 401 Unauthorized | |
| Joe's phone <------------------ Asterisk | ||
| Request: SUBSCRIBE | SIP: Request: SUBSCRIBE sip:333@192.168.0.10:5060 | |
| Joe's phone ------------------> Asterisk | ||
| Status: 200 OK | SIP: Status: 200 OK | |
| Joe's phone ------------------> Asterisk | ||
After that the Asterisk PBK sends a notification to Leo's phone to tell the status of Joe's line. The table below shows an example notification:
| 192.168.0.247 | 192.168.0.10 | SIP Message |
|---|---|---|
| Request: NOTIFY | SIP: Request: NOTIFY sip:444@192.168.0.247:5060 | |
| Joe's phone <------------------ Asterisk | ||
| Status: 200 OK | SIP: Status: 200 OK | |
| Joe's phone ------------------> Asterisk | ||
The line status is delivered in the XML body of the notify message. OpenStage phones supports three different line statuses:
Idle (LED off)
The idle state is notified within the dialog event subscription. The dialog state in the message body is terminated or left empty.
Here is an example for Joe's idle state sent to Leo.
Message:
NOTIFY sip:444@192.168.0.247:5060;transport=udp SIP/2.0
v: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK38e76e71;rport
f: <sip:333@192.168.0.10:5060;transport=udp>;tag=as4aa60d2a
t: Leo Demo 444 <sip:444@192.168.0.10>;tag=cc29a24a90;epid=SCBCC441
m: <sip:333@192.168.0.10>
i: 46c0a8f00bff87e0
CSeq: 102 NOTIFY
User-Agent: Asterisk Gemeinschaft
Max-Forwards: 70
o: dialog
c: application/dialog-info+xml
Subscription-State: active
l: 208
Body:
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:333@192.168.0.10:5060">
<dialog id="333">
<state>terminated</state>
</dialog>
</dialog-info>
Ringing (LED blinking)
The ringing state is notified within the dialog event subscription. The dialog state in the message body is early.
Here is an example for Joe#s ringing state sent to Leo.
Message:
NOTIFY sip:444@192.168.0.247:5060;transport=udp SIP/2.0
v: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK66a6adf2;rport
f: <sip:333@192.168.0.10:5060;transport=udp>;tag=as6576596c
t: Leo Demo 444 <sip:444@192.168.0.10>;tag=9304448a7d;epid=SCBCC441
m: <sip:333@192.168.0.10>
i: 7a5553c742843273
CSeq: 103 NOTIFY
User-Agent: Asterisk Gemeinschaft
Max-Forwards: 70
o: dialog
c: application/dialog-info+xml
Subscription-State: active
l: 225
Body:
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:333@192.168.0.10:5060">
<dialog id="333" direction="recipient">
<state>early</state>
</dialog>
</dialog-info>
Connected/Busy (LED on)
The connected/busy state is notified within the dialog event subscription. The dialog state in the message body is confirmed.
Here is an example for Joe's connected/busy state sent to Leo.
Message:
NOTIFY sip:444@192.168.0.247:5060;transport=udp SIP/2.0
v: SIP/2.0/UDP 192.168.0.10:5060;branch=z9hG4bK3685f474;rport
f: <sip:333@192.168.0.10:5060;transport=udp>;tag=as05967368
t: Leo Demo 444 <sip:444@192.168.0.10>;tag=2ad7b4ac94;epid=SCBCC441
m: <sip:333@192.168.0.10>
i: 4a6a3f0f21b83343
CSeq: 103 NOTIFY
User-Agent: Asterisk Gemeinschaft
Max-Forwards: 70
o: dialog
c: application/dialog-info+xml
Subscription-State: active
l: 207
Body:
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="1" state="full" entity="sip:333@192.168.0.10:5060">
<dialog id="333">
<state>confirmed</state>
</dialog>
</dialog-info>
Complete Example Call Flow
A example call flow has been recorded. At the end of this call flow Joe is in busy (LED on), Alice is in ringing (LED blinking) and Bob is in idle state (LED off).
The complete example call flow: 
BLFBasicCallFlow
