|
|
(24 intermediate revisions by 5 users not shown) |
Line 1: |
Line 1: |
− | <div class="breadcrumb">
| + | {{Breadcrumb|0|0|{{dev-en}}|optiPoint|optiPoint 410/420 S}} |
− | {{up}} [[How To]] | {{de}} [[Einrichten von optiPoint 410/420-Telefonen mit NetBoot]] | |
− | </div>
| |
− | Um auf ein Telefon der optiPoint Familie 410/420 ([[SIP]] oder [[HFA]]) Software zu kopieren, kann man einen [[NetBoot]]-Server verwenden, der auf einem PC installiert wird.
| |
− | Den Netboot-Server braucht man für einen Download meistens dann, wenn
| |
− | * die Firmware (auch netboot) des Telefons nicht mehr aktuell ist,
| |
− | * das Telefon nicht mehr bootet und daher z. B. nicht mehr über die Web-Schnittstelle erreichbar ist oder
| |
− | * die Applikationssoftware aktualisiert werden soll, aber das Telefon über die üblichen Benutzerschnittstellen nicht erreichbar ist.
| |
| | | |
− | Übertragen werden können
| + | {{Discontinued|en|Devices}} |
− | * die aktuelle bzw. zu ersetzende Applikationssoftware mit der Extension <code>.fli</code> (z. B. <code>410adv_SIP_6_0_55.fli</code>) und
| |
− | * ggf. eine neue NetBoot-Version der Telefon-Firmware (z. B. <code>netboot201.fli</code> für SIP oder <code>netboot308.fli</code> für HFA).
| |
− | | |
− | Es ist möglich sowohl eine SIP-Software mit einer HFA-Software als auch eine HFA-Software mit einer SIP-Software zu überschreiben.
| |
− | | |
− | == Prerequisite ==
| |
− | | |
− | You need modules with at least the hardware versions listed under [[SIP V6.0 optiPoint compatibility]] in order to update telephones in the optiPoint 410/420 famiily for use under SIP V6.0. HFA updates (firmware and application) can be performed on all model versions of the optiPoint 410/420 family.
| |
− | | |
− | You need the following to complete the download:
| |
− | * A PC with a[[LAN]] connection,
| |
− | * The relevant from the optiPoint 410/420 family,
| |
− | * A [[TFTP]] server (e.g. the 3CDaemon from [http://www.3com.com/ 3Com]),
| |
− | * The[[NetBoot]] server program for the PC (you will find the program on the [https://enterprise-businessarea.siemens.com SEBA] Web portal under the relevant heading - Login required) and
| |
− | * The data for installation (see above).
| |
− | | |
− | == Preparation ==
| |
− | | |
− | * Install the NetBoot and the[[TFTP]] server on the PC, if this has not already been done.
| |
− | * Fetch the files to be transferred or have them at the ready (you will find the data in the [https://enterprise-businessarea.siemens.com SEBA] Web portal under the relevant heading - Login required).
| |
− | | |
− | == Configuring the [[TFTP]] server ==
| |
− | | |
− | Start the TFTP server. Click '''Configure TFTP Server''', go to the '''TFTP Configuration''' tab and specify the directory under '''Upload/Download directory''' in which the files for installation are stored.
| |
− | | |
− | [[Image:10 configure TFTP server.png|thumb|left|Konfiguration TFTP-Server|300px]]<br clear="left">
| |
− | | |
− | == Configuring the Netboot server==
| |
− | | |
− | Start the NetBoot server. You will see the following window:
| |
− | | |
− | [[Image:NetBoot-start.gif|thumb|left|Main window of NetBoot server|300px]]<br clear="left">
| |
− | | |
− | === Adding an entry ===
| |
− | | |
− | Click '''Add Entry''' in the main window in the '''Database''' menu. The following dialog is displayed:
| |
− | | |
− | [[Image:NetBoot-addentr.gif|thumb|left|Details of telephone properties|300px]]<br clear="left">
| |
− | | |
− | Provide the following information:
| |
− | * '''Alias''': Enter a freely definable alias name for this entry, for example <code>optiPoint 410 economy plus S</code>.
| |
− | * '''MAC Address''' > '''Single Address''': Enter the MAC address of the phone.<br>The MAC address is imprinted on the underside of the optiPoint phone as '''Ser.No.''':[[Image:op-macaddr.jpg|thumb|left|optiPoint MAC address]]<br clear="left">
| |
− | * Tick '''Active'''.
| |
− | * '''IP Address''' > '''Fixed Address''': Enter the IP address the phone is to have after it has been started in Netboot mode.
| |
− | * '''Boot File''': Specify the file that is to be loaded. This can either be an application or a new NetBoot version, for example: <code>410adv_SIP_6_0_58.fli</code> or <code>netboot201.fli</code>.
| |
− | | |
− | Click'''OK''' to apply the changes.
| |
− | | |
− | === Defining general properties ===
| |
− | | |
− | Click the '''Properties''' option in the main window in the '''Database''' menu. The following dialog box opens:
| |
− | | |
− | [[Image:NetBoot-propgeneral.gif|thumb|left|Details of netmask|300px]]<br clear="left">
| |
− | | |
− | * '''Network Mask''': Specify the subnet mask valid in your [[LAN]].
| |
− | | |
− | Click '''Firmware Update'''. The following dialog is displayed:
| |
− | | |
− | [[Image:NetBoot-propupdate.gif|thumb|left|Details of server IP and path|300px]]<br clear="left">
| |
− | | |
− | * '''TFTP Server IP Address''': Specify the IP address of the TFTP server.
| |
− | * '''Boot Image Search Path''': Specify a path for the file if applicable, starting from the server root.
| |
− | | |
− | Click '''OK''' to apply the changes.
| |
− | | |
− | All preparations are now complete. You can now perform the update.
| |
− | | |
− | == Ausführen des Applikations- oder NetBoot-Updates ==
| |
− | | |
− | Achten Sie darauf, dass der [[TFTP]]-Server und der [[NetBoot]]-Server auf dem PC gestartet sind.
| |
− | | |
− | Bei Stromversorgung des Telefons über Netzteil:
| |
− | * Schließen Sie das Telefon an das LAN an.
| |
− | * Halten Sie die Taste [[Image:opk-3.png]] des Telefons gedrückt und schließen Sie die Stromversorgung des Telefons an.
| |
− | | |
− | Bei Stromversorgung des Telefons über LAN ([[PoE]]):
| |
− | * Halten Sie die Taste [[Image:opk-3.png]] des Telefons gedrückt und schließen Sie das Telefon an das LAN an.
| |
− | | |
− | Das Telefon sucht den NetBoot-Server, lädt die Update-Datei vom [[TFTP]]-Server und bootet anschließend mit der neuen Applikations- bzw. Firmware (NetBoot-Software).
| |