|
|
(114 intermediate revisions by 9 users not shown) |
Line 1: |
Line 1: |
− | The '''optiPoint 150 S Release Notes''' describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the [[optiPoint 150 S]] ({{de}}[[optiPoint 150 S (de)|optiPoint 150 S]]).
| + | {{Breadcrumb|en|0|{{dev-en}}|optiPoint|optiPoint 150 S}} |
− | | + | {{Discontinued|en|Devices}} |
− | == V1.26 ==
| |
− | | |
− | === What’s New? ===
| |
− | {| {{DefaultTable}}
| |
− | ! Internal ID
| |
− | ! Cluster
| |
− | ! New feature
| |
− | ! Comment
| |
− | |-
| |
− | | 398
| |
− | | IP
| |
− | | New default QoS L3 values
| |
− | | Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
| |
− | |-
| |
− | |}
| |
− | | |
− | === Fixed Bugs ===
| |
− | | |
− | {| {{DefaultTable}}
| |
− | ! Internal ID
| |
− | ! Cluster
| |
− | ! Problem
| |
− | ! Comment
| |
− | |- | |
− | | 400
| |
− | | HP3k
| |
− | | No Ringback tone when calling Upoe or HFA phone @ HP3k
| |
− | | complies now to RFC 3960 sect 3.2
| |
− | |-
| |
− | | 392
| |
− | | Admin
| |
− | | Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)
| |
− | | Now neither WBM nor local admin can configure CF in this case (correct!)
| |
− | |-
| |
− | | N/A
| |
− | | IP
| |
− | | Phone is sending out ARP requests for IP: 192.1.1.49 But this IP is NOWHERE configured in the phone.
| |
− | |
| |
− | |-
| |
− | |} | |
− | | |
− | == V1.25 ==
| |
− | | |
− | === Fixed Bugs ===
| |
− | * General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
| |
− | | |
− | == V1.24 ==
| |
− | | |
− | === What’s New? ===
| |
− | * Support of DNS query SRV (DNS_SRV)
| |
− | * Support DNS TTL
| |
− | * Support RFC 3264 Hold for Broadsoft
| |
− | | |
− | === Fixed Bugs ===
| |
− | * General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
| |
− | * General: Loud tone when call disconnected
| |
− | * General: Calltransfer not possible after toggle between calls
| |
− | * LAN: phone doesn’t register, if L2 QoS value is set
| |
− | * LAN: VLAN ID can’t be reset to None
| |
− | * HiPath 3000: Toggle between calls not possible
| |
− | * HiPath 3000: Busy tone after attended Call transfer
| |
− | * HiPath 3000: HP3k-HP3k trunking, no payload after transfer
| |
− | * Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
| |
− | | |
− | === Known & Open Issues ===
| |
− | * HiPath 3000: Blind (semi-attended) transfer doesn’t work
| |
− | * Not possible to dial, after first call was made with Hook on
| |
− | * Symmetric use of UDP ports (planned for V1.25)
| |
− | | |
− | == V1.23 ==
| |
− | | |
− | === What’s New? ===
| |
− | * Telnet port disabled
| |
− | * Distinctive Ringing (Sylantro) supported
| |