|
|
(123 intermediate revisions by 9 users not shown) |
Line 1: |
Line 1: |
− | The '''optiPoint 150 S Release Notes''' describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the [[optiPoint 150 S]] ({{de}}[[optiPoint 150 S (de)|optiPoint 150 S]]).
| + | {{Breadcrumb|en|0|{{dev-en}}|optiPoint|optiPoint 150 S}} |
− | | + | {{Discontinued|en|Devices}} |
− | == V1.26 ==
| |
− | | |
− | === What’s New? ===
| |
− | * IP: New L3-QoS default parameters: Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
| |
− | * HiPath 300
| |
− | | |
− | === Fixed Bugs ===
| |
− | * HiPath 3000: No Ringback tone when calling Upoe or HFA phone
| |
− | * Admin: Configuration of Call forwarding on the phone (type set to HP3k, HP4k)
| |
− | * IP: Phone send ARP requests to IP: 192.1.1.49
| |
− | | |
− | == V1.25 ==
| |
− | | |
− | === Fixed Bugs ===
| |
− | * General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
| |
− | | |
− | == V1.24 ==
| |
− | | |
− | === What’s New? ===
| |
− | * Support of DNS query SRV (DNS_SRV)
| |
− | * Support DNS TTL
| |
− | * Support RFC 3264 Hold for Broadsoft
| |
− | | |
− | === Fixed Bugs ===
| |
− | * General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
| |
− | * General: Loud tone when call disconnected
| |
− | * General: Calltransfer not possible after toggle between calls
| |
− | * LAN: phone doesn’t register, if L2 QoS value is set
| |
− | * LAN: VLAN ID can’t be reset to None
| |
− | * HiPath 3000: Toggle between calls not possible
| |
− | * HiPath 3000: Busy tone after attended Call transfer
| |
− | * HiPath 3000: HP3k-HP3k trunking, no payload after transfer
| |
− | * Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
| |
− | | |
− | === Known & Open Issues ===
| |
− | * HiPath 3000: Blind (semi-attended) transfer doesn’t work
| |
− | * Not possible to dial, after first call was made with Hook on
| |
− | * Symmetric use of UDP ports (planned for V1.25)
| |
− | | |
− | == V1.23 ==
| |
− | | |
− | === What’s New? ===
| |
− | * Telnet port disabled
| |
− | * Distinctive Ringing (Sylantro) supported
| |