View source for ckaehlerSandBox

{{constr|[[User:Christian.kaehler|Christian.kaehler]] 10:53, 29 November 2006 (CET)}}

<div class="breadcrumb">
{{up}} [[How To]]
</div>
== Detect the phone's IP address ==
Starting point: The phone is connected to the LAN and the boot phase has been completed.

# Press the [[Image:opk-re.png]] key four times. The display shows:<br><code>05=Administration</code><br>
# Press the [[Image:opk-ok.png]] key. The display shows:<br><code>02=Configuration</code><br>
# Press [[Image:opk-6.png]] and the admin password (default: [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]]). The display shows:<br><code>Config:</code><br><code>01=Network?</code>
# Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?</code>.
# You may read the IP address and use this to switch over to the [[WBM]] by using a web browser (Microsoft Internet Explorer recommended).


[[Category:optiPoint]]
[[Category:Configuration]]