Views

optiPoint WL2 professional family (CorNet-IP/SIP) Surveying Mode

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 21:54, 3 April 2007 by Davide.poletto (talk | contribs) (How to access)
Jump to: navigation, search

optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode overview


Surveying Mode

The optiPoint WL2 professional VoWLAN wireless client offers a Surveying Mode of operation that is:

  • Selectable via the hidden Service menu
  • Useful to grab real-time information of the connected Wireless LAN Access Point
  • Available on optiPoint WL2 professional family either in:
    • CorNet IP (HFA) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
    • SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
  • Used to enhance the serviceability of the WLAN workpoints
  • Used to perform WLAN site surveys and deployments

Service Menu

optiPoint WL2 professional and optiPoint WL2 professional S have an hidden "Service" menu

How to access

In order to access the hidden Service menu on the workpoint these steps are required:

  • Turn off the optiPoint WL2 professional
  • Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (the Power button) at the same time
  • The hourglass icon appears in the phone display
  • Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
  • The optiPoint WL2 professional powers up showing "Service" on the display
  • Enter code 76200 to access displayed Service menu

Submenu List

Once into the "Service" menu, the items are listed in this order:

  • Network Scan
  • SW Release
  • QS Data
  • Speechpath test
  • Working time
  • Contrast
  • WPS
  • Factory Default
  • Clean Up
  • Backlight Switch
  • Surveying Mode

Operation

Once selected the Surveying Mode on the Service menu the optiPoint WL2 professional will display various informations related to Wireless signal quality and availability.