Difference between revisions of "optiPoint WL2 professional family (CorNet-IP/SIP) Surveying Mode"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
(→Service Menu) |
|||
| Line 21: | Line 21: | ||
In order to access the ''hidden'' '''Service''' menu on the workpoint these steps are required: | In order to access the ''hidden'' '''Service''' menu on the workpoint these steps are required: | ||
| − | + | # Turn off the optiPoint WL2 professional | |
| − | + | # Press simultaneously and hold dial pad buttons ''1-4-7'' and ''On Hook'' key (the Power button) at the same time | |
| − | + | # The hourglass icon appears in the phone display | |
| − | + | # Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking) | |
| − | + | # The optiPoint WL2 professional powers up showing "Service" on the display | |
| − | + | # Enter code ''76200'' to access displayed '''Service''' menu | |
=== Submenu List === | === Submenu List === | ||
Revision as of 07:45, 4 September 2007
This is an overview of optiPoint WL2 professional and optiPoint WL2 professional S Surveying Mode.
Surveying Mode
The optiPoint WL2 professional VoWLAN wireless client offers a Surveying Mode of operation that is:
- Selectable via the hidden Service menu
- Useful to grab real-time information of the connected Wireless LAN Access Point
- Available on optiPoint WL2 professional family either in:
- CorNet IP (HFA) software feature set (Since optiPoint WL2 professional V1.0 version 50.002.24.00047)
- SIP software feature set (Since optiPoint WL2 professional S V1.0 version 70.042.90)
- Used to enhance the serviceability of the WLAN workpoints
- Used to perform WLAN site surveys and deployments
Service Menu
optiPoint WL2 professional and optiPoint WL2 professional S have a hidden "Service" menu.
How to access
In order to access the hidden Service menu on the workpoint these steps are required:
- Turn off the optiPoint WL2 professional
- Press simultaneously and hold dial pad buttons 1-4-7 and On Hook key (the Power button) at the same time
- The hourglass icon appears in the phone display
- Keep them pressed, releasing the Power button in the while, until Speakerphone's LED and the MWI's LED are activated and flashing red (Blinking)
- The optiPoint WL2 professional powers up showing "Service" on the display
- Enter code 76200 to access displayed Service menu
Once into the "Service" menu, the items are listed in this order:
- Network Scan
- SW Release
- QS Data
- Speechpath test
- Working time
- Contrast
- WPS
- Factory Default
- Clean Up
- Backlight Switch
- Surveying Mode
Operation
Once selected the Surveying Mode on the Service menu the optiPoint WL2 professional will display various informations related to Wireless signal quality and availability.
