Views

optiPoint SIP HW compatibility

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 09:21, 23 December 2009 by Stefan.Niebling (talk | contribs) (usb-info added)
Jump to: navigation, search

To operate optiPoint SIP phones with SIP V7 firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also general information on SIP V7.

Hardware support

Part number

Part number of an optiPoint

All phones ordered as SIP phones can be used for SIP V7 without restrictions. Phones originally ordered as CorNet IP (HFA), can be migrated to SIP, beginning with a specific hardware revision level (see table below).

The part number on the housing's bottom side shows the phone type originally ordered:

  • A for CorNet IP (HFA) phones, example: S30817-S7212-A107-6
  • L for SIP V4.1 phones, example: S30817-S7212-L107-1
  • M for SIP V5.0 or V6.0 or V7.0 phones, example: S30817-S7212-M107-1

Compatibility of originally CorNet IP phones

CorNet IP Phone Housing color Part number Compatible version
optiPoint 410 entry arctic S30817-S7201-A101-X X ≥ 13
mangan S30817-S7201-A107-X X ≥ 20
optiPoint 410 economy arctic S30817-S7202-A101-X X ≥ 12
mangan S30817-S7202-A107-X X ≥ 18
optiPoint 410 economy plus arctic S30817-S7212-A101-X X ≥ 6
mangan S30817-S7212-A107-X X ≥ 7
optiPoint 410 standard arctic S30817-S7203-A101-X X ≥ 12
mangan S30817-S7203-A107-X X ≥ 20
optiPoint 410 advance arctic S30817-S7204-A101-X X ≥ 12 [1]
mangan S30817-S7204-A107-X X ≥ 17 <ref name="USB_port">
optiPoint 420 economy arctic S30817-S7209-A101-X X ≥ 1
mangan S30817-S7209-A107-X X ≥ 3
optiPoint 420 economy plus arctic S30817-S7210-A101-X X ≥ 3
mangan S30817-S7210-A107-X X ≥ 3
optiPoint 420 standard arctic S30817-S7211-A101-X X ≥ 3
mangan S30817-S7211-A107-X X ≥ 3
optiPoint 420 advance arctic S30817-S7207-A101-X X ≥ 11 <ref name="USB_port">
mangan S30817-S7207-A107-X X ≥ 9 <ref name="USB_port">

Additionally it is necessary that the phone hardware contains the INCA©-IP chip V1.4.

Software support

Software Version
Bootrom (NetBoot) V4.05
optiPoint display module software Usage of the optiPoint display module is not longer supported
optiPoint application module software The optiPoint application module is not supported in SIP

Compliant products

Please check optiPoint 410/420 S interoperability matrix.

The Deployment Tool is not released for SIP V7.0 phones. Use Deployment Service instead.

  1. Upon the following hardware revisions the optiPoint 4x0 advance does not longer have an USB-port. This hardware revision must be used with software version optiPoint 410/420 SIP V7.0 R4.1.0 (or higher).

    • S30817-S7204-A101-26 (optiPoint 410 advance arctic)
    • S30817-S7204-A107-31 (optiPoint 410 advance mangan)
    • S30817-S7207-A101-26 (optiPoint 420 advance arctic)
    • S30817-S7207-A107-24 (optiPoint 420 advance mangan)
    • S30817-S7204-M101-8 (optiPoint 410 advance arctic)
    • S30817-S7204-M107-8 (optiPoint 410 advance mangan)
    • S30817-S7207-M101-9 (optiPoint 420 advance arctic)
    • S30817-S7207-M107-9 (optiPoint 420 advance mangan)