Views

Difference between revisions of "optiPoint SIP HW compatibility"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Compatibility of originally CorNet IP phones)
 
(20 intermediate revisions by 4 users not shown)
Line 1: Line 1:
To operate [[optiPoint]] [[SIP]] phones with [[SIP V6.0 on optiPoint 410/420 S|SIP V6.0]] firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible.
+
{{Breadcrumb|0|0|{{dev-en}}}}
 +
To operate [[optiPoint]] [[SIP]] phones with [[optiPoint_410/420_S_general_information_to_SIP_V7.0|SIP V7]] firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also general information on [[optiPoint_410/420_S_general_information_to_SIP_V7.0|SIP V7]].
  
 
== Hardware support ==
 
== Hardware support ==
Line 6: Line 7:
 
[[Image:op-partno.jpg|thumb|Part number of an optiPoint]]
 
[[Image:op-partno.jpg|thumb|Part number of an optiPoint]]
  
All phones ordered as SIP phones can be used for [[SIP V6.0]] without restrictions. Phones originally ordered as CorNet IP ([[HFA]]), can be migrated to [[SIP]], beginning with a specific hardware revision level (see table below).
+
All phones ordered as SIP phones can be used for [[optiPoint_410/420_S_general_information_to_SIP_V7.0|SIP V7]] without restrictions. Phones originally ordered as CorNet IP ([[HFA]]), can be migrated to [[SIP]] beginning with a specific hardware revision level (see table below).
  
 
The part number on the housing's bottom side shows the phone type originally ordered:
 
The part number on the housing's bottom side shows the phone type originally ordered:
* '''A''' for CorNet IP (HFA) phones, example: S30817-S7212-'''A'''107-1
+
* '''A''' for CorNet IP (HFA) phones, example: S30817-S7212-'''A'''107-6
 
* '''L''' for SIP V4.1 phones, example: S30817-S7212-'''L'''107-1
 
* '''L''' for SIP V4.1 phones, example: S30817-S7212-'''L'''107-1
* '''M''' for SIP V5.0 or V6.0 phones, example: S30817-S7212-'''M'''107-1
+
* '''M''' for SIP V5.0 or V6.0 or V7.0 phones, example: S30817-S7212-'''M'''107-1
  
 
=== Compatibility of originally CorNet IP phones ===
 
=== Compatibility of originally CorNet IP phones ===
Line 24: Line 25:
 
| arctic
 
| arctic
 
| S30817-S7201-A101-X
 
| S30817-S7201-A101-X
| X ≥ 9
+
| X ≥ 13
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7201-A107-X
 
| S30817-S7201-A107-X
| X ≥ 16
+
| X ≥ 20
 
|-
 
|-
 
| rowspan="2" | optiPoint 410 economy
 
| rowspan="2" | optiPoint 410 economy
 
| arctic
 
| arctic
 
| S30817-S7202-A101-X
 
| S30817-S7202-A101-X
| X ≥ 9
+
| X ≥ 12
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7202-A107-X
 
| S30817-S7202-A107-X
| X ≥ 15
+
| X ≥ 18
 
|-
 
|-
 
| rowspan="2" | optiPoint 410 economy plus
 
| rowspan="2" | optiPoint 410 economy plus
 
| arctic
 
| arctic
 
| S30817-S7212-A101-X
 
| S30817-S7212-A101-X
| X ≥ 5
+
| X ≥ 6
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7212-A107-X
 
| S30817-S7212-A107-X
| X ≥ 6
+
| X ≥ 7
 
|-
 
|-
 
| rowspan="2" | optiPoint 410 standard
 
| rowspan="2" | optiPoint 410 standard
 
| arctic
 
| arctic
 
| S30817-S7203-A101-X
 
| S30817-S7203-A101-X
| X ≥ 9
+
| X ≥ 12
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7203-A107-X
 
| S30817-S7203-A107-X
| X ≥ 17
+
| X ≥ 20
 
|-
 
|-
 
| rowspan="2" | optiPoint 410 advance
 
| rowspan="2" | optiPoint 410 advance
 
| arctic
 
| arctic
 
| S30817-S7204-A101-X
 
| S30817-S7204-A101-X
| X ≥ 9
+
| X ≥ 12
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7204-A107-X
 
| S30817-S7204-A107-X
| X ≥ 14
+
| X ≥ 17
 
|-
 
|-
 
| rowspan="2" | optiPoint 420 economy
 
| rowspan="2" | optiPoint 420 economy
Line 73: Line 74:
 
| mangan
 
| mangan
 
| S30817-S7209-A107-X
 
| S30817-S7209-A107-X
| X ≥ 1
+
| X ≥ 3
 
|-
 
|-
 
| rowspan="2" | optiPoint 420 economy plus
 
| rowspan="2" | optiPoint 420 economy plus
Line 96: Line 97:
 
| arctic
 
| arctic
 
| S30817-S7207-A101-X
 
| S30817-S7207-A101-X
| X ≥ 8
+
| X ≥ 11
 
|-
 
|-
 
| mangan
 
| mangan
 
| S30817-S7207-A107-X
 
| S30817-S7207-A107-X
| X ≥ 6
+
| X ≥ 9
 
|}
 
|}
  
Additionally it is necessary that the phone hardware contains the [[INCA|INCA©-IP]] chip V1.3.
+
'''Important:''' It is necessary that the phone hardware contains the [[INCA|INCA©-IP]] chip V1.4.
  
 
== Software support ==
 
== Software support ==
Line 111: Line 112:
 
! width="220" | Version
 
! width="220" | Version
 
|-
 
|-
| Bootrom (Netboot)
+
| Bootrom ([[NetBoot]])
| V2.01
+
| V4.05
|-
 
| [[optiPoint display module]] software
 
| DM01.07
 
 
|}
 
|}
  
== Compliant products ==
+
 
 +
== Restrictions ==
 +
 
 +
===Deployment Tool / Deployment Service===
 +
The [[Deployment Tool]] is not released for SIP [[optiPoint_410/420_S_general_information_to_SIP_V7.0|V7.0]] phones. Use [[Deployment Service]] instead.
 +
 
 +
===optiPoint 4x0 advance USB-functionality===
 +
Upon the following hardware revisions the optiPoint 4x0 advance does not longer have an USB-port. <br/><br/>
 +
* S30817-S7204-A101-26 (optiPoint 410 advance arctic)
 +
* S30817-S7204-A107-31 (optiPoint 410 advance mangan)
 +
* S30817-S7207-A101-26 (optiPoint 420 advance arctic)
 +
* S30817-S7207-A107-24 (optiPoint 420 advance mangan)
 +
* S30817-S7204-M101-8 (optiPoint 410 advance arctic)
 +
* S30817-S7204-M107-8 (optiPoint 410 advance mangan)
 +
* S30817-S7207-M101-9 (optiPoint 420 advance arctic)
 +
* S30817-S7207-M107-9 (optiPoint 420 advance mangan)
 +
'''Important:''' This hardware revision must be used with software version [[optiPoint 410/420 S Release Notes#V7 R4.1.0|optiPoint 410/420 SIP V7.0 R4.1.0 (or later)]].
 +
 
 +
===New display type===
 +
Beginning with V7 R5.5.0 a new type of display is supported - these displays are assimilated with beginning of the following part-numbers:
 +
* S30817-S7202-A101-27 (optiPoint 410 economy arctic)
 +
* S30817-S7202-A107-33 (optiPoint 410 economy mangan)
 +
* S30817-S7212-A101-20 (optiPoint 410 economy plus arctic)
 +
* S30817-S7212-A107-20 (optiPoint 410 economy plus mangan)
 +
* S30817-S7203-A101-29 (optiPoint 410 standard arctic)
 +
* S30817-S7203-A107-37 (optiPoint 410 standard mangan)
 +
* S30817-S7209-A101-16 (optiPoint 420 economy arctic)
 +
* S30817-S7209-A107-17 (optiPoint 420 economy mangan)
 +
* S30817-S7210-A101-17 (optiPoint 420 economy plus arctic)
 +
* S30817-S7210-A107-18 (optiPoint 420 economy plus mangan)
 +
* S30817-S7211-A101-17 (optiPoint 420 standard arctic)
 +
* S30817-S7211-A107-18 (optiPoint 420 standard mangan)
 +
'''Important:''' When replacing a display on an older phone or using a phone with a hardware number mentioned above these phone must be used with [[optiPoint 410/420 S Release Notes#V7 R5.5.0|optiPoint 410/420 SIP V7.0 R5.5.0 (or later)]] and netboot Bootroom V4.05.
 +
 
 +
===Modules===
  
 
{| {{DefaultTable}}
 
{| {{DefaultTable}}
! width="220" | Product
+
! width="220" | Software
 
! width="220" | Version
 
! width="220" | Version
 
|-
 
|-
| [[HiPath 2000]]
+
| [[optiPoint display module]] software
| V1.0 SMR 6 or higher
+
| Usage of the [[optiPoint display module]] is not longer supported
|-
 
| [[HiPath 3000/5000]]
 
| V5.0 SMR 11<br />V6.0 SMR 6 or higher
 
|-
 
| [[HiPath 4000]]
 
| V3.0
 
|-
 
| [[HiPath 8000]]
 
| V2.0 SMR 03 PS01E01<br />V2.1 SMR 02 PS01E03 or higher
 
|-
 
| [[Deployment Service]]
 
| V1.0 CV199.31 or higher
 
 
|-
 
|-
 +
| [[optiPoint application module]] software
 +
| The optiPoint application module is not supported in SIP
 
|}
 
|}
  
The [[Deployment Tool]] is not released for [[SIP V6.0]] phones. Use [[Deployment Service]] instead.
+
 
 +
== Compliant products ==
 +
Please check [[optiPoint 410/420 S interoperability matrix]].
 +
 
 +
 
 +
 
  
  
 
[[Category:optiPoint]]
 
[[Category:optiPoint]]

Latest revision as of 21:13, 23 April 2011

To operate optiPoint SIP phones with SIP V7 firmware, it is necessary that both the phone hardware, additional phone software and cooperative products are compatible. See also general information on SIP V7.

Hardware support

Part number

Part number of an optiPoint

All phones ordered as SIP phones can be used for SIP V7 without restrictions. Phones originally ordered as CorNet IP (HFA), can be migrated to SIP beginning with a specific hardware revision level (see table below).

The part number on the housing's bottom side shows the phone type originally ordered:

  • A for CorNet IP (HFA) phones, example: S30817-S7212-A107-6
  • L for SIP V4.1 phones, example: S30817-S7212-L107-1
  • M for SIP V5.0 or V6.0 or V7.0 phones, example: S30817-S7212-M107-1

Compatibility of originally CorNet IP phones

CorNet IP Phone Housing color Part number Compatible version
optiPoint 410 entry arctic S30817-S7201-A101-X X ≥ 13
mangan S30817-S7201-A107-X X ≥ 20
optiPoint 410 economy arctic S30817-S7202-A101-X X ≥ 12
mangan S30817-S7202-A107-X X ≥ 18
optiPoint 410 economy plus arctic S30817-S7212-A101-X X ≥ 6
mangan S30817-S7212-A107-X X ≥ 7
optiPoint 410 standard arctic S30817-S7203-A101-X X ≥ 12
mangan S30817-S7203-A107-X X ≥ 20
optiPoint 410 advance arctic S30817-S7204-A101-X X ≥ 12
mangan S30817-S7204-A107-X X ≥ 17
optiPoint 420 economy arctic S30817-S7209-A101-X X ≥ 1
mangan S30817-S7209-A107-X X ≥ 3
optiPoint 420 economy plus arctic S30817-S7210-A101-X X ≥ 3
mangan S30817-S7210-A107-X X ≥ 3
optiPoint 420 standard arctic S30817-S7211-A101-X X ≥ 3
mangan S30817-S7211-A107-X X ≥ 3
optiPoint 420 advance arctic S30817-S7207-A101-X X ≥ 11
mangan S30817-S7207-A107-X X ≥ 9

Important: It is necessary that the phone hardware contains the INCA©-IP chip V1.4.

Software support

Software Version
Bootrom (NetBoot) V4.05


Restrictions

Deployment Tool / Deployment Service

The Deployment Tool is not released for SIP V7.0 phones. Use Deployment Service instead.

optiPoint 4x0 advance USB-functionality

Upon the following hardware revisions the optiPoint 4x0 advance does not longer have an USB-port.

  • S30817-S7204-A101-26 (optiPoint 410 advance arctic)
  • S30817-S7204-A107-31 (optiPoint 410 advance mangan)
  • S30817-S7207-A101-26 (optiPoint 420 advance arctic)
  • S30817-S7207-A107-24 (optiPoint 420 advance mangan)
  • S30817-S7204-M101-8 (optiPoint 410 advance arctic)
  • S30817-S7204-M107-8 (optiPoint 410 advance mangan)
  • S30817-S7207-M101-9 (optiPoint 420 advance arctic)
  • S30817-S7207-M107-9 (optiPoint 420 advance mangan)

Important: This hardware revision must be used with software version optiPoint 410/420 SIP V7.0 R4.1.0 (or later).

New display type

Beginning with V7 R5.5.0 a new type of display is supported - these displays are assimilated with beginning of the following part-numbers:

  • S30817-S7202-A101-27 (optiPoint 410 economy arctic)
  • S30817-S7202-A107-33 (optiPoint 410 economy mangan)
  • S30817-S7212-A101-20 (optiPoint 410 economy plus arctic)
  • S30817-S7212-A107-20 (optiPoint 410 economy plus mangan)
  • S30817-S7203-A101-29 (optiPoint 410 standard arctic)
  • S30817-S7203-A107-37 (optiPoint 410 standard mangan)
  • S30817-S7209-A101-16 (optiPoint 420 economy arctic)
  • S30817-S7209-A107-17 (optiPoint 420 economy mangan)
  • S30817-S7210-A101-17 (optiPoint 420 economy plus arctic)
  • S30817-S7210-A107-18 (optiPoint 420 economy plus mangan)
  • S30817-S7211-A101-17 (optiPoint 420 standard arctic)
  • S30817-S7211-A107-18 (optiPoint 420 standard mangan)

Important: When replacing a display on an older phone or using a phone with a hardware number mentioned above these phone must be used with optiPoint 410/420 SIP V7.0 R5.5.0 (or later) and netboot Bootroom V4.05.

Modules

Software Version
optiPoint display module software Usage of the optiPoint display module is not longer supported
optiPoint application module software The optiPoint application module is not supported in SIP


Compliant products

Please check optiPoint 410/420 S interoperability matrix.