optiPoint 410/420 S upgrade to SIP V6.0
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
Revision as of 20:20, 3 December 2006 by Christian.kaehler (talk | contribs) (Protected "Upgrade optiPoint 410/420 phones to SIP V6.0": content provided by enterprise [edit=sysop:move=sysop])
This information describes distinctions while upgrading optiPoint 410/420 phones to SIP V6.0. For common upgrade procedure (download application) refer to Firmware upgrade optiPoint 410/420 S phones.
The SIP V6.0 firmware can be loaded onto the phone via FTP (if supported by the software being upgraded from):
- Via the Web-based management (supported by all).
- Via the phone's local user interface (not supported by 410 entry S).
- Via Deployment Service (supported by V4.1.20 onwards and V5.0.x and V6.0.x).
Migration from CorNet IP (HFA) to SIP
See Migrate optiPoint 410/420 CorNet IP (HFA) phones to SIP.
Upgrading from SIP V5.0.15 or earlier
In SIP V6.0 the VLAN discovery default settings are set to DHCP. This may cause problem, when the phone was configured for manual VLAN discovery.
- Change the phone's VLAN discovery setting to
DHCP, then back tomanual. This will store the setting in the phone’s database and the default value is not used. - Reboot the phone.
- Upgrade phone to SIP V6.0 (see Firmware upgrade optiPoint 410/420 S phones).
