Views

Difference between revisions of "optiPoint 410/420 S setup with several Provider"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Terminal details)
Line 118: Line 118:
 
| ''optional''
 
| ''optional''
 
|}
 
|}
 +
 +
==== SIP details ====
  
  

Revision as of 12:38, 7 September 2006

In this How To article you find an overview and a detailled description how to setup the optiPoint_410/420_S with several VoIP provider.

Basic configuration

The following tables show as a comparison the necessary parameters to setup the optiPoint_410/420_S with several provider. The paths in the sub-section headlines refer to the Web-based management of the optiPoint_410/420_S.
Of course you are free to add the settings for your favourite provider in the tables below.

Network IP and Routing

WBM screenshoot Network IP and Routing


DHCP
1&1 On
bellshare On
blueSIP On
Freenet On
Nikotel On
Sipgate On
STRATO On
WEB.DE On

The usage of the DHCP function is recommended. If you require a static IP address due to special circumstances (e.g. for registration of several devices within the same network environment), deactivate the checkbox for the DHCP function. The required information on how to set a static IP address can be found in the Administration Manual of the optiPoint 410/420 S.

SIP Environment

Terminal details

WBM screenshoot Network IP and Routing


Phone number Phone name Register by name Display ID Use Display ID
1&1 optional your SIP-ID On optional optional
bellshare optional your SIP-ID On optional optional
blueSIP optional your SIP-ID On optional optional
Freenet optional your SIP-ID On optional optional
Nikotel optional your SIP-ID On optional optional
Sipgate optional your SIP-ID On optional optional
STRATO optional your SIP-ID On optional optional
WEB.DE optional your SIP-ID On optional optional

SIP details