Views

Difference between revisions of "optiPoint 410/420 S factory reset"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
 
(20 intermediate revisions by 4 users not shown)
Line 1: Line 1:
The reset to factory defaults at optiPoint 410/420 S phones can be done by [[WBM|Web-based management]] and local phone procedure.
+
{{Breadcrumb|0|0|{{dev-en}}|optiPoint|optiPoint 410/420 S}}
To factory reset optiPoint 410/420 phones ([[CorNet IP]]) see [[Factory reset optiPoint 410/420 phones]].
 
  
== optiPoint 410/420 S display phones ==
+
The '''reset to factory defaults at optiPoint 410/420 S phones''' can be done by [[WBM|Web-based management]] and local phone procedure.
  
=== By [[WBM|Web-based management]] ===
+
== By [[WBM|Web-based management]] ==
  
(TBD)
+
=== optiPoint 410/420 S all types ===
  
=== By local phone procedure ===
+
Connect to the [[WBM]] and login as administrator. Select the item "Reset factory setting" and enter the reset PW '''124816'''.
Ensure that call control is on the phone, not the DSM ???.
+
 
* Disconnect phone from [[LAN]] (except [[PoE]]).
+
 
 +
[[Image:OptiPoint_410420_S_V6.0_FactorySetting1.jpg|none|thumb|Select the item "Reset factory setting"]]
 +
 
 +
'''Note:''' Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.
 +
 
 +
----
 +
 
 +
== By local phone procedure ==
 +
 
 +
=== optiPoint 410/420 S display phones ===
 +
* Disconnect phone from [[LAN]] (only required for netboot < V2.01, [[PoE]] devices temporarily need external power supply).
 
* Lift handset.
 
* Lift handset.
 
* Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]].
 
* Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]].
* Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]].
+
* Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]] and press the Confirm button [[Image:opk-ok.png]].
 
* Replace handset.
 
* Replace handset.
* Connect phone to [[LAN]] (except [[PoE]]).
 
 
== optiPoint 410/420 entry S ==
 
 
=== By [[WBM|Web-based management]] ===
 
  
(TBD)
+
* If required, re-connect phone to [[LAN]].
  
=== By local phone procedure ===
+
=== optiPoint 410 entry S ===
 
* Disconnect phone from [[LAN]] (except [[PoE]]).
 
* Disconnect phone from [[LAN]] (except [[PoE]]).
 
* Press keys simultaneously [[Image:opk-3.png]] [[Image:opk-8.png]] [[Image:opk-9.png]].
 
* Press keys simultaneously [[Image:opk-3.png]] [[Image:opk-8.png]] [[Image:opk-9.png]].
Line 30: Line 34:
 
* Press the key [[Image:opk-rau.png]].
 
* Press the key [[Image:opk-rau.png]].
 
* Connect phone to [[LAN]] (except [[PoE]]).
 
* Connect phone to [[LAN]] (except [[PoE]]).
 +
 +
{{SeeAlso optiPoint 410/420 S}}
 +
 +
[[Category:optiPoint]]
 +
[[Category:Configuration]]

Latest revision as of 08:39, 11 August 2011

The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.

By Web-based management

optiPoint 410/420 S all types

Connect to the WBM and login as administrator. Select the item "Reset factory setting" and enter the reset PW 124816.


Select the item "Reset factory setting"

Note: Since factory settings may differ to the settings used for connecting to the WBM before, you may need to check IP address and L2/L3 settings before you can continue working with the WBM.


By local phone procedure

optiPoint 410/420 S display phones

  • Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
  • Lift handset.
  • Type in reset code opk-minus.png opk-plus.png opk-ast.png opk-3.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png and press the Confirm button opk-ok.png.
  • Replace handset.
  • If required, re-connect phone to LAN.

optiPoint 410 entry S

  • Disconnect phone from LAN (except PoE).
  • Press keys simultaneously opk-3.png opk-8.png opk-9.png.
  • Press the key opk-ast.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png.
  • Press the key opk-rau.png.
  • Connect phone to LAN (except PoE).

See also