Views

Difference between revisions of "optiPoint 410/420 S factory reset"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (By local phone procedure)
Line 12: Line 12:
 
=== By local phone procedure ===
 
=== By local phone procedure ===
 
Ensure that call control is on the phone, not the DSM ???.
 
Ensure that call control is on the phone, not the DSM ???.
* Disconnect phone from [[LAN]] (except [[PoE]]).
+
* Disconnect phone from [[LAN]] (only required for netboot < V2.01, [[PoE]] devices temporarily need external power supply).
 
* Lift handset.
 
* Lift handset.
 
* Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]].
 
* Type in reset code [[Image:opk-minus.png]] [[Image:opk-plus.png]] [[Image:opk-ast.png]] [[Image:opk-3.png]].
 
* Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]].
 
* Type in reset password [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-4.png]] [[Image:opk-8.png]] [[Image:opk-1.png]] [[Image:opk-6.png]].
 
* Replace handset.
 
* Replace handset.
* Connect phone to [[LAN]] (except [[PoE]]).
+
 
 +
* If required, re-connect phone to [[LAN]].
  
 
== optiPoint 410 entry S ==
 
== optiPoint 410 entry S ==

Revision as of 18:43, 17 September 2006

The reset to factory defaults at optiPoint 410/420 S phones can be done by Web-based management and local phone procedure.

optiPoint 410/420 S display phones

By Web-based management

(TBD)

By local phone procedure

Ensure that call control is on the phone, not the DSM ???.

  • Disconnect phone from LAN (only required for netboot < V2.01, PoE devices temporarily need external power supply).
  • Lift handset.
  • Type in reset code opk-minus.png opk-plus.png opk-ast.png opk-3.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png.
  • Replace handset.
  • If required, re-connect phone to LAN.

optiPoint 410 entry S

By Web-based management

(TBD)

By local phone procedure

  • Disconnect phone from LAN (except PoE).
  • Press keys simultaneously opk-3.png opk-8.png opk-9.png.
  • Press the key opk-ast.png.
  • Type in reset password opk-1.png opk-2.png opk-4.png opk-8.png opk-1.png opk-6.png.
  • Press the key opk-rau.png.
  • Connect phone to LAN (except PoE).