Views

Difference between revisions of "optiPoint 410/420 S UDP Trace"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m
Line 9: Line 9:
 
To activate the trace,  
 
To activate the trace,  
 
:* log-in to the [[WBM]] as administrator
 
:* log-in to the [[WBM]] as administrator
 +
: [[Image:optiPoint_SIP_Admin_FaultInvestigation.JPG|none|thumb|Select Fault Investigation ]]
 
:* Select the fault investigation menu
 
:* Select the fault investigation menu
 +
: [[Image:optiPoint_SIP_FaultInvestigation.JPG|none|thumb|Select SIP UDP Trace]]
 
:* Enable the SIP UDP Trace - set the check box and submit
 
:* Enable the SIP UDP Trace - set the check box and submit
 +
: [[Image:optiPoint_SIP_SIP_UDP_Trace.jpg|none|thumb|Activate the trace]]
 
:* After desired trace period, follow the link to the message log
 
:* After desired trace period, follow the link to the message log
 +
: [[Image:optiPoint_SIP_Message_Log.jpg|none|thumb|SIP UDP Message log]]
 +
: The message log can be deleted afterwards
  
: The message log can be deleted afterwards
+
{{Warning|Do not forget to '''de-activate''' the SIP UDP Trace when tracing is no longer required - tracing is consuming ressources and performance}}
  
Do not forget to de-activate the SIP UDP Trace when tracing is no longer required - tracing is consuming ressources and performance
 
  
: [[Image:optiPoint_SIP_Admin_FaultInvestigation.JPG|none|thumb|Select Fault Investigation [[WBM]]]]
 
  
  
 
[[Category:optiPoint]]
 
[[Category:optiPoint]]
 
[[Category:Configuration]]
 
[[Category:Configuration]]

Revision as of 14:48, 2 November 2006

If problems in operating the phones are encountered, showing a display message like "no server" or "Registering..." for a longer time, then these problems are likely to be related to the signalling with the SIP proxy or registrar. It is often helpful to capture the messages with a network hub and display these data with one of the well known tools to examine the problem in more detail.

If no hub is available or a PC trace tool cannot be used for some reason, the build in SIP UDP trace of the optiPoint can be used as well.

To activate the trace,

  • log-in to the WBM as administrator
Select Fault Investigation
  • Select the fault investigation menu
Select SIP UDP Trace
  • Enable the SIP UDP Trace - set the check box and submit
Activate the trace
  • After desired trace period, follow the link to the message log
SIP UDP Message log
The message log can be deleted afterwards
Do not forget to de-activate the SIP UDP Trace when tracing is no longer required - tracing is consuming ressources and performance