|
|
| (22 intermediate revisions by 5 users not shown) |
| Line 1: |
Line 1: |
| − | <div class="breadcrumb">
| + | {{Breadcrumb|0|0|{{dev-en}}|optiPoint|optiPoint 410/420 S}} |
| − | {{up}} [[How To]] | {{de}} [[Setting up optiPoint 410/420 telephones with NetBoot]] | |
| − | </div>
| |
| − | In order to copy ([[SIP]] or [[HFA]]) software to a telephone in the optiPoint 410/420 family, you need a [[NetBoot]] server installed on a PC.
| |
| − | The Netboot server is generally required for a download if:
| |
| − | * The firmware (also netboot) of the telephone is no longer up to date,
| |
| − | * The telephone no longer boots and therefore is no longer accessible via the Web interface or
| |
| − | * The application software is to be updated but the telephone is not accessible via the usual user interfaces.
| |
| | | | |
| − | The following can be transferred:
| + | {{Discontinued|en|Devices}} |
| − | * The current or replacement application software with the extension <code>.fli</code> (e.g. <code>410adv_SIP_6_0_55.fli</code>) and
| |
| − | * A new NetBoot version of the telephone firmware is applicable (e.g. <code>netboot201.fli</code> for SIP or <code>netboot308.fli</code> for HFA).
| |
| − | | |
| − | It is possible to overwrite both SIP software with HFA software and HFA software with SIP software.
| |
| − | | |
| − | == Prerequisite ==
| |
| − | | |
| − | You need modules with at least the hardware versions listed under [[SIP V6.0 optiPoint compatibility]] in order to update telephones in the optiPoint 410/420 famiily for use under SIP V6.0. HFA updates (firmware and application) can be performed on all model versions of the optiPoint 410/420 family.
| |
| − | | |
| − | You need the following to complete the download:
| |
| − | * A PC with a[[LAN]] connection,
| |
| − | * The relevant from the optiPoint 410/420 family,
| |
| − | * A [[TFTP]] server (e.g. the 3CDaemon from [http://www.3com.com/ 3Com]),
| |
| − | * The[[NetBoot]] server program for the PC (you will find the program on the [https://enterprise-businessarea.siemens.com SEBA] Web portal under the relevant heading - Login required) and
| |
| − | * The data for installation (see above).
| |
| − | | |
| − | == Preparation ==
| |
| − | | |
| − | * Install the NetBoot and the[[TFTP]] server on the PC, if this has not already been done.
| |
| − | * Fetch the files to be transferred or have them at the ready (you will find the data in the [https://enterprise-businessarea.siemens.com SEBA] Web portal under the relevant heading - Login required).
| |
| − | | |
| − | == Configuring the [[TFTP]] server ==
| |
| − | | |
| − | Start the TFTP server. Click '''Configure TFTP Server''', go to the '''TFTP Configuration''' tab and specify the directory under '''Upload/Download directory''' in which the files for installation are stored.
| |
| − | | |
| − | [[Image:10 configure TFTP server.png|thumb|left|Konfiguration TFTP-Server|300px]]<br clear="left">
| |
| − | | |
| − | == Configuring the Netboot server==
| |
| − | | |
| − | Start the NetBoot server. You will see the following window:
| |
| − | | |
| − | [[Image:NetBoot-start.gif|thumb|left|Main window of NetBoot server|300px]]<br clear="left">
| |
| − | | |
| − | === Adding an entry ===
| |
| − | | |
| − | Click '''Add Entry''' in the main window in the '''Database''' menu. The following dialog is displayed:
| |
| − | | |
| − | [[Image:NetBoot-addentr.gif|thumb|left|Details of telephone properties|300px]]<br clear="left">
| |
| − | | |
| − | Provide the following information:
| |
| − | * '''Alias''': Enter a freely definable alias name for this entry, for example <code>optiPoint 410 economy plus S</code>.
| |
| − | * '''MAC Address''' > '''Single Address''': Enter the MAC address of the phone.<br>The MAC address is imprinted on the underside of the optiPoint phone as '''Ser.No.''':[[Image:op-macaddr.jpg|thumb|left|optiPoint MAC address]]<br clear="left">
| |
| − | * Tick '''Active'''.
| |
| − | * '''IP Address''' > '''Fixed Address''': Enter the IP address the phone is to have after it has been started in Netboot mode.
| |
| − | * '''Boot File''': Specify the file that is to be loaded. This can either be an application or a new NetBoot version, for example: <code>410adv_SIP_6_0_58.fli</code> or <code>netboot201.fli</code>.
| |
| − | | |
| − | Click'''OK''' to apply the changes.
| |
| − | | |
| − | === Defining general properties ===
| |
| − | | |
| − | Click the '''Properties''' option in the main window in the '''Database''' menu. The following dialog box opens:
| |
| − | | |
| − | [[Image:NetBoot-propgeneral.gif|thumb|left|Details of netmask|300px]]<br clear="left">
| |
| − | | |
| − | * '''Network Mask''': Specify the subnet mask valid in your [[LAN]].
| |
| − | | |
| − | Click '''Firmware Update'''. The following dialog is displayed:
| |
| − | | |
| − | [[Image:NetBoot-propupdate.gif|thumb|left|Details of server IP and path|300px]]<br clear="left">
| |
| − | | |
| − | * '''TFTP Server IP Address''': Specify the IP address of the TFTP server.
| |
| − | * '''Boot Image Search Path''': Specify a path for the file if applicable, starting from the server root.
| |
| − | | |
| − | Click '''OK''' to apply the changes.
| |
| − | | |
| − | All preparations are now complete. You can now perform the update.
| |
| − | | |
| − | == Executing the application or NetBoot update ==
| |
| − | | |
| − | Make sure that the [[TFTP]] server and the [[NetBoot]] server are started on the PC.
| |
| − | | |
| − | If power is supplied to the phone via a power supply unit:
| |
| − | * Connect the phone to the LAN.
| |
| − | * Hold down the [[Image:opk-3.png]] key on the phone and and connect the power supply for the phone.
| |
| − | | |
| − | If power is supplied to the phone via LAN ([[PoE]]):
| |
| − | * Hold down the [[Image:opk-3.png]] key on the phone and and connect the phone to the LAN.
| |
| − | | |
| − | The phone searches for the NetBoot server, loads the update file from the [[TFTP]] server and then boots with the new application or firmware (NetBoot software).
| |
Home 
