Views

Difference between revisions of "optiPoint 410/420 CorNet IP (HFA) to SIP migration"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Download new firmware)
(Detect the phone's IP address)
Line 33: Line 33:
 
The display will show:<br><code>Enter admin password</code><br><code>_</code>
 
The display will show:<br><code>Enter admin password</code><br><code>_</code>
 
# Press key pad for digits [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]], which is the factory default password.
 
# Press key pad for digits [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]], which is the factory default password.
# The display will show:<br><code>Config:               </code><br><code>01=Network?             </code>
+
# The display will show:<br><code>Config:</code><br><code>01=Network?</code>
# Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?   </code>.
+
# Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?</code>.
 
# You may read the IP address and use this to switch over to the [[WBM]] by using a web browser (Microsoft Internet Explorer recommended).
 
# You may read the IP address and use this to switch over to the [[WBM]] by using a web browser (Microsoft Internet Explorer recommended).
  

Revision as of 16:18, 16 September 2006

This migration procedure is for upgrading an optiPoint 410/420 CorNet IP phone V5.1.2x to SIP V6.0.56 and later.

Connect the phone to LAN

Connect the optiPoint CorNet IP phone to the LAN (DHCP=on is default). The assumption is that DHCP is available in your local area network. The phone will reboot.

Depending on the version of the CorNet IP application installed

Subscriber number is prompted

  1. Enter some digits like opk-1.png opk-2.png opk-3.png ???
  2. Confirm Save Changes with the opk-ok.png key.
  3. The display will show:
    Administration
    01=Configuration?
  4. Press the opk-ok.png key.

Continue with Detect the phone's IP address.

Subscriber number is not prompted

If you have not been prompted for the subscriber number, the display will show:

Invalide GW Adress or No suscriber number

  1. Press the opk-ok.png key.
  2. The display will show:
    Administration
    01=Configuration?
  3. Press the opk-ok.png key once more.

Continue with Detect the phone's IP address.

Detect the phone's IP address

The display will show:
Enter admin password
_

  1. Press key pad for digits opk-1.png opk-2.png opk-3.png opk-4.png opk-5.png opk-6.png, which is the factory default password.
  2. The display will show:
    Config:
    01=Network?
  3. Press the opk-ok.png key and the opk-re.png key to select 02=Terminal IP addr.?.
  4. You may read the IP address and use this to switch over to the WBM by using a web browser (Microsoft Internet Explorer recommended).

Continue with Download new firmware.

Download new firmware

  1. In the Web browser's URL row type in http://Phone-IP-Address:8085, e.g. http://192.168.1.2:8085.
  2. Enter the Administration menu (default password: 123456).
  3. Select the Upload/Download section.
  4. Select Download application.
  5. Start a standard FTP server (e.g. 3Com Daemon), and fill out the relevant FTP data, refer to the screenshot below.
File transfer screenshot in optiPoint 410/420 phone WBM

Continue with Restore factory settings.

Restore factory settings

After successful restart of the application, it is recommended to perform a factory reset.

  1. Select Restore factory setting in the WBM.
  2. Enter the factory reset password: 124816.

The phone will reboot and start with the updated firmware version.


This has to be removed here later: pdf.png  Quick Guide Migrating CorNet-IP to SIP