Views

optiPoint 150 S Release Notes

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 16:48, 23 December 2006 by Davide.poletto (talk | contribs) (Text corrections, added link to new Software Versioning wiki page.)
Jump to: navigation, search

The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs and open issues for appropriate firmware versions of the optiPoint 150 S (Deutschland optiPoint 150 S).

Software versioning / naming

A new software versioning scheme was introduced, it requires that a new versioning name should be adopted for each software product.
Software product version will be now identified with the string:

V x[.y] R m.f.h

in which field:

  • x[.y] denotes the Major release level
  • m denotes the Minor release level
  • f denotes the Fix release level
  • h denotes the Hotfix level


This naming convention scheme does not imply any naming requirements for file / files available.


More informations on the New Software Versioning scheme wiki page.

V1 R0.31.0 (V1.31)

What’s New?

  • Allow alpha numeric phone number, phone name and user ID
  • Symmetric UDP Ports
  • Support DNS query SRV
  • Support DNS TTL
  • Support RFC3264 hold for Broadsoft

Fixed Bugs

  • Special characters like /, -, @ are now possible to be entered under SIP setup/ SIP settings in the Web based management.
  • No Fallback to Inband DTMF
  • Number not dialed when going offhook
  • Phone plays DTMF digits if called while dialing onhook
  • No Registration to SIP Server when DNS name is a canonicle name for an alias
  • No automatic callback if a semi-attanded transfer is initiated before Ringing.
  • No Ringback tone when doing enquiry
  • Semi Attended TRansfer does not work on HiPath 2000
  • DNS TTL does not work
  • Sylantro ID1.6 Inbound Call when Busy LCD display error
  • Sylantro ID3.6 Call-Waiting Interrupted LCD display error
  • Call log list always shows the oldest entry at first
  • Phone plays DTMF digits if called while dialing.
  • Providertest Web.de: No Registration with DNS Name for SIP Server


Known & Open Issues

  • The Time Format and Date Format are not changed according to country standard.
  • Be able to disable *99 at Sylantro


V1 R0.28.0 (V1.28)

What’s New?

Internal ID Cluster New feature Comment
N/A Sylantro Special call park feature for Sylantro V4.0 Fixed
N/A Sylantro Special call pick-up feature for Sylantro V4.0 Fixed
N/A Sylantro Distinctive ringing for Sylantro V4.0 Fixed

Fixed Bugs and new features since Version 1.22

  • Broadsoft: DHCP Trouble - phone couldn't obtain IP adress via DHCP shortly
  • Broadsoft: Should not perform SRV lookup if service domain IPv4 format
  • Broadsoft: Failover/failback mechanism
  • Broadsoft: Support RFC 3264 Hold for Broadsoft
  • IP: New default QoS L3 values (Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
  • Admin: Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)Now neither WBM nor local admin can configure CF in this case
  • General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
  • Support of DNS query SRV (DNS_SRV)
  • General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
  • General: Short loud tone when call disconnected (after hook-on for about 200 ms)
  • General: Calltransfer not possible after toggle between calls
  • General: The "Port field" in the SIP settings should aleady have a default value 5060.
  • General: To stay conform with other Siemens phones the default Codec Settings of the OP150S should be changed to "G.711A > G.711U > G.72x"
  • General: Not possible to dial after first call was made with Hook on.
  • General: Telnet access to optiPoint 150 S
  • LAN: phone doesn’t register, if L2 QoS value is set
  • LAN: VLAN ID can’t be reset to None
  • HiPath 3000: Toggle between calls not possible
  • HiPath 3000: Do not disturb is not working
  • HiPath 3000: No Ringback tone when calling Upoe or HFA phone @ HP3k (complies now to RFC 3960 sect 3.2)
  • HiPath 3000: Busy tone after attended Call transfer
  • HiPath 3000: HP3k-HP3k trunking, no payload after transfer
  • Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
  • Telnet port disabled
  • Sylantro: Distinctive Ringing (Sylantro) supported

Known & Open Issues

  • HiPath 3000: Blind (semi-attended) transfer doesn’t work
  • Not possible to dial, after first call was made with Hook on
  • Symmetric use of UDP ports

V1 R0.22.0 (V1.22)

Fixed Bugs and new features:

  • VLAN ID can't be configured via Phone
  • Blind transfer does not work oh H8000
  • After factory reset it is still possible to log in as user defined in last saved configuration
  • Admin password is not reset after factory reset
  • Disable Telnet Access at the optiPoint 150