Difference between revisions of "optiPoint 150 S Release Notes"
The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.
| Line 12: | Line 12: | ||
=== Fixed Bugs === | === Fixed Bugs === | ||
| + | * Special characters like <nowiki>/</nowiki>, <nowiki>-</nowiki>, <nowiki>@</nowiki> are now possible to be entered under SIP setup/ SIP settings in the Web based management. | ||
* No Fallback to Inband DTMF | * No Fallback to Inband DTMF | ||
* Number not dialed when going offhook | * Number not dialed when going offhook | ||
| Line 29: | Line 30: | ||
=== Known & Open Issues === | === Known & Open Issues === | ||
* The Time Format and Date Format are not changed according to country standard. | * The Time Format and Date Format are not changed according to country standard. | ||
| − | |||
* Be able to disable *99 at Sylantro | * Be able to disable *99 at Sylantro | ||
Revision as of 12:35, 21 December 2006
The optiPoint 150 S Release Notes describe descending sorted new features, fixed firmware bugs und open issues for appropriate firmware versions of the optiPoint 150 S (
optiPoint 150 S).
Contents
V1.31
What’s New?
- Allow alpha numeric phone number, phone name and user ID
- Symmetric UDP Ports
- Support DNS query SRV
- Support DNS TTL
- Support RFC3264 hold for Broadsoft
Fixed Bugs
- Special characters like /, -, @ are now possible to be entered under SIP setup/ SIP settings in the Web based management.
- No Fallback to Inband DTMF
- Number not dialed when going offhook
- Phone plays DTMF digits if called while dialing onhook
- No Registration to SIP Server when DNS name is a canonicle name for an alias
- No automatic callback if a semi-attanded transfer is initiated before Ringing.
- No Ringback tone when doing enquiry
- Semi Attended TRansfer does not work on HiPath 2000
- DNS TTL does not work
- Sylantro ID1.6 Inbound Call when Busy LCD display error
- Sylantro ID3.6 Call-Waiting Interrupted LCD display error
- Call log list always shows the oldest entry at first
- Phone plays DTMF digits if called while dialing.
- Providertest Web.de: No Registration with DNS Name for SIP Server
Known & Open Issues
- The Time Format and Date Format are not changed according to country standard.
- Be able to disable *99 at Sylantro
V1.28
What’s New?
| Internal ID | Cluster | New feature | Comment |
|---|---|---|---|
| N/A | Sylantro | Special call park feature for Sylantro V4.0 | Fixed |
| N/A | Sylantro | Special call pick-up feature for Sylantro V4.0 | Fixed |
| N/A | Sylantro | Distinctive ringing for Sylantro V4.0 | Fixed |
Fixed Bugs and new features since Version 1.22
- Broadsoft: DHCP Trouble - phone couldn't obtain IP adress via DHCP shortly
- Broadsoft: Should not perform SRV lookup if service domain IPv4 format
- Broadsoft: Failover/failback mechanism
- Broadsoft: Support RFC 3264 Hold for Broadsoft
- IP: New default QoS L3 values (Signalling: AF31 (DSCP 26) and RTP: EF (DSCP 46)
- Admin: Possible to configure Call forwarding at the phone when connected to HP3k, HP4k)Now neither WBM nor local admin can configure CF in this case
- General: Possibiliy to use special characters in SIP-ID like (@, /, %) needed for registration on some of the SIP providers.
- Support of DNS query SRV (DNS_SRV)
- General: alphanumeric SIP_ID’s now possible (e.g. vorname.nachname@provider.com)
- General: Short loud tone when call disconnected (after hook-on for about 200 ms)
- General: Calltransfer not possible after toggle between calls
- General: The "Port field" in the SIP settings should aleady have a default value 5060.
- General: To stay conform with other Siemens phones the default Codec Settings of the OP150S should be changed to "G.711A > G.711U > G.72x"
- General: Not possible to dial after first call was made with Hook on.
- General: Telnet access to optiPoint 150 S
- LAN: phone doesn’t register, if L2 QoS value is set
- LAN: VLAN ID can’t be reset to None
- HiPath 3000: Toggle between calls not possible
- HiPath 3000: Do not disturb is not working
- HiPath 3000: No Ringback tone when calling Upoe or HFA phone @ HP3k (complies now to RFC 3960 sect 3.2)
- HiPath 3000: Busy tone after attended Call transfer
- HiPath 3000: HP3k-HP3k trunking, no payload after transfer
- Phone GUI: Remove possibility to configure Call Forwarding when connected to HiPath 2000, HiPath 3000, HiPath 4000, HiPath 5000
- Telnet port disabled
- Sylantro: Distinctive Ringing (Sylantro) supported
Known & Open Issues
- HiPath 3000: Blind (semi-attended) transfer doesn’t work
- Not possible to dial, after first call was made with Hook on
- Symmetric use of UDP ports
V1.22
Fixed Bugs and new features:
- VLAN ID can't be configured via Phone
- Blind transfer does not work oh H8000
- After factory reset it is still possible to log in as user defined in last saved configuration
- Admin password is not reset after factory reset
- Disable Telnet Access at the optiPoint 150
