Views

Difference between revisions of "openSUSE 10.3 Installationshinweise"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Getestete Server Hardware)
(Common installation hints)
Line 88: Line 88:
 
== Common installation hints ==
 
== Common installation hints ==
  
* '''openSUSE 10.3 has to be installed in 32 Bit Mode''' (F7-Key only available with dual DVD 32/64).
+
* '''openSUSE 10.3 muss im 32-Bit-Modus installiert werden''' (F7-Taste ist nur bei Dual DVD 32/64 verfügbar).
 
: [[Image:openSUSE10.3-Install01.jpg|275px]]
 
: [[Image:openSUSE10.3-Install01.jpg|275px]]
  
* '''Hard disc problems:'''
+
* '''Festplattenprobleme:'''
 
: Modern servers are today often delivered with S-ATA hard disc controllers. Some of those controllers are not supported by openSUSE 10.3. In case of problems with the hard disc recognition, the AHCI mode must be disabled in the server BIOS and the server has to be restarted.  After this change the server runs in P-ATA compatible mode.
 
: Modern servers are today often delivered with S-ATA hard disc controllers. Some of those controllers are not supported by openSUSE 10.3. In case of problems with the hard disc recognition, the AHCI mode must be disabled in the server BIOS and the server has to be restarted.  After this change the server runs in P-ATA compatible mode.
  

Revision as of 12:26, 22 June 2009

Template:InfoBox-HP3K-de

Um Probleme während der OpenScape Office Server Installation mit openSUSE 10.3 zu vermeiden, beachten Sie bitte die nachfolgenden Informationen und Hinweise.

Getestete Netzwerk Adapter mit openSUSE 10.3

Netzwerk Adapter D-Link DFE-528TX

  • Typ: DFE-528TX Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
  • Slot: 32 Bit PCI
  • Hinweis: automatische Erkennung

Netzwerk Adapter D-Link DGE-528T

  • Typ: DGE-528T Gigabit Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T, 1000 Base-T
  • Slot: PCI 2.2
  • Hinweis: automatische Erkennung

Netzwerk Adapter Netgear FA311 V2

  • Typ: Netgear FA311v2 Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-T
  • Slot: PCI
  • Hinweis: automatische Erkennung

Netzwerk Adapter Netgear GA311

  • Typ: Netgear GA311 Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
  • Slot: PCI 2.2
  • Hinweis: automatische Erkennung

Netzwerk Adapter Fujitsu Siemens Netlink

  • Typ: Fujitsu Siemens Fast Ethernet PCI
  • Standard: 10 MBit/s 10Base-T, 100 MBit/s 10Base-TX, 1000 Base-T
  • Slot: PCI E
  • Hinweis: automatische Erkennung, S26361-F3067-L30

Getestete Server Hardware

Primergy TX150 S6

  • openSUSE Linux 10.3: OK.
  • SUSE Linux Enterprise Server 10 mit SP2: OK.
  • Die Installation von OpenSUSE 10.3 am FS Primergy TX150 S6 ist möglich.

Es brauchen keine Parameter für ACPI oder AHCI geändert werden. Um die LAN-Schnittstellen zu überprüfen wurde eine SSH-Verbindung zu einem anderen Server hergestellt. Dies funktioniert sowohl mit der OnBoard-Netzwerkkarte als auch mit einer externen Netzwerkkarte. Jedoch wurde die Installation ausschließlich mit der OpenSUSE-DVD durchgeführt und nicht mit dem (Windows-)Installationsprogramm, das mit dem Server mitgeliefert wurde. Das bereits verfügbare RAID-System (vorinstalliert bei einer früheren Installation) wurde von der OpenSUSE-Installation erkannt. An der Partitionierung wurden keine Änderungen vorgenommen.

Celsius W370

  • openSUSE Linux 10.3: Einschränkung, die OnBoard-Netzwerkkarte wurde nicht erkannt.
  • SUSE Linux Enterprise Server 10 mit SP2: OK, die OnBoard-Netzwerkkarte wurde nach Installation der Fujitsu-Trieber erkannt.

Dell Poweredge T105

  • AMD Opteron 2.1 GHz, 1 GB RAM, 250 GB Festplatte, DVD-Laufwerk
  • openSUSE Linux 10.3: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.
  • SUSE Linux Enterprise Server 10 mit SP2: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.

HP Proliant ML110 G5

  • Xenon dualcore 2.13 GHz, 1 GB RAM, 250 GB Festplatte, DVD-Laufwerk
  • openSUSE Linux 10.3: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.
  • SUSE Linux Enterprise Server 10 mit SP2: OK, Betriebssystem muss als 32-Bit-Variante installiert werden.

Common installation hints

  • openSUSE 10.3 muss im 32-Bit-Modus installiert werden (F7-Taste ist nur bei Dual DVD 32/64 verfügbar).
275px
  • Festplattenprobleme:
Modern servers are today often delivered with S-ATA hard disc controllers. Some of those controllers are not supported by openSUSE 10.3. In case of problems with the hard disc recognition, the AHCI mode must be disabled in the server BIOS and the server has to be restarted. After this change the server runs in P-ATA compatible mode.
  • Network adapter problems:
Install a certified external network adapter (refer to list of tested adapters above).
  • When experiencing general problems:
Press the following Function keys after starting the installation from the openSUSE install disc:
  • F3 key >> for Graphics Adapter = Text Mode
275px
  • F5 key >> for Kernel Mode AHCI = off
275px
  • Problem: openSuse CD is always started from CD Drive.
In this example the hard disc setting is IDE Mode. The setting has to be changed from Native IDE to AHCI (S-ATA) in the server BIOS and the server has to be restarted.
275px
  • Problem with Fujitsu TX 150 server:
openSUSE 10.3 hangs up during installation. The following setting has to be changed and openSUSE installed again.
275px