Views

Difference between revisions of "ckaehlerSandBox"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (sandbox reset)
m (/draft/)
Line 4: Line 4:
 
{{up}} [[How To]]
 
{{up}} [[How To]]
 
</div>
 
</div>
 +
== Detect the phone's IP address ==
 +
Starting point: The phone is connected to the LAN and the boot phase has been completed.
 +
 +
# Press the [[Image:opk-re.png]] key four times. The display shows:<br><code>05=Administration</code><br>
 +
# Press the [[Image:opk-ok.png]] key. The display shows:<br><code>02=Configuration</code><br>
 +
# Press [[Image:opk-6.png]] and the admin password (default: [[Image:opk-1.png]] [[Image:opk-2.png]] [[Image:opk-3.png]] [[Image:opk-4.png]] [[Image:opk-5.png]] [[Image:opk-6.png]]). The display shows:<br><code>Config:</code><br><code>01=Network?</code>
 +
# Press the [[Image:opk-ok.png]] key and the [[Image:opk-re.png]] key to select <code>02=Terminal IP addr.?</code>.
 +
# You may read the IP address and use this to switch over to the [[WBM]] by using a web browser (Microsoft Internet Explorer recommended).
 +
  
 
[[Category:optiPoint]]
 
[[Category:optiPoint]]
 
[[Category:Configuration]]
 
[[Category:Configuration]]

Revision as of 20:38, 3 December 2006

Construction.png This article or section is currently under construction. In order to avoid editing conflicts, please wait until this message is removed or contact the author (Christian.kaehler 10:53, 29 November 2006 (CET)).

Detect the phone's IP address

Starting point: The phone is connected to the LAN and the boot phase has been completed.

  1. Press the opk-re.png key four times. The display shows:
    05=Administration
  2. Press the opk-ok.png key. The display shows:
    02=Configuration
  3. Press opk-6.png and the admin password (default: opk-1.png opk-2.png opk-3.png opk-4.png opk-5.png opk-6.png). The display shows:
    Config:
    01=Network?
  4. Press the opk-ok.png key and the opk-re.png key to select 02=Terminal IP addr.?.
  5. You may read the IP address and use this to switch over to the WBM by using a web browser (Microsoft Internet Explorer recommended).