Views

chemical resistance testing

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 16:14, 18 March 2020 by Haidar (talk | contribs)
Jump to: navigation, search

Disinfectants are used in medical facilities such as hospitals, outpatient departments, care facilities, or also in food production and in canteens. Disinfectants contain ingredients that not only combat microorganisms, but can also attack surfaces.

High-quality materials are used for the UNIFY DECT Handsets to protect them in daily use. The UNIFY DECT Handsets are additionally protected by a surface coating against the effects of a number of commercially available disinfectants.

To test the effectiveness of the surface coating, a number of agents were tested during the product development with the surfaces of the UNIFY DECT Handsets. These tests range from several types of artificial hand perspiration (alkaline, basic) to olive oil or cream. Because to the special use of the OpenStage M3 models, they are also tested with drilling emulsion, for example.

These agents have been expanded to include skin disinfectants, hand care products and surface disinfectants in the latest OpenScape DECT Phone S5 / OpenScape DECT Phone SL5 handsets series.

With the OpenScape DECT Phone S5 and OpenScape DECT Phone SL5, only materials are used that have proven to be uncritical in these tests.

The following agents have been tested to obtain a representative selection:

Hand disinfectant

  • AHD 2000 - Dr. Hans Rosemann
  • Sterillium classic - Bode
  • Epicare disinfectant - Ecolab
  • Desdermann pure - Schülke
  • Spitacid - Ecolab


Skin care products

  • CIMO Sept - Dr. Fast
  • Samolind - Dr. Fast
  • Samtasan - Dr. Fast


Surface disinfection

  • Incidin Rapid - Ecolab


Note: The UNIFY DECT Handsets must still not be dipped or these agents should be sprayed directly onto the handsets - it is recommended to apply these agents with a cloth and wipe them off so that the agents do not penetrate into the devices, otherwise there is a risk of a short circuit. These agents should be removed completely to avoid deposits.