Views

Troubleshooting

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 14:18, 19 November 2014 by Konstantinos Kontogiannis (talk | contribs) (Created page with "<div class="breadcrumb"> {{up}} How to collection and tutorials for OpenScape Deployment Service </div> '''Clients cannot receive any IP address''' If a DHCP client does...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Clients cannot receive any IP address

If a DHCP client does not have a configured IP address, this normally means that the client cannot set up a connection to a DHCP server. This is due either to a network problem or to the fact that the DHCP server is not available.

If the DHCP server has been started and other clients can retrieve valid addresses, check whether the client has a valid network connection and all hardware devices associated with the client (including cables and network cards) are working properly.

The DHCP server is not available

Frequently, the reason why a DHCP server does not provide the clients with address leases is because the DHCP service has not started correctly. If this is the case, the server may not have been authorized for operation in the network.

If you were previously able to start the DHCP server but it has stopped in the meanwhile, use the event display to examine the system log for entries that may explain the cause.

NOTE: To restart the DHCP service, click Start, click Run, enter cmd, and then press the <ENTER> key. Enter net start dhcpserver and then press the <ENTER> key.