Views

Difference between revisions of "Talk:HiPath Xpressions Compact"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (Xpressions Compact 2.5/3.0 Front-end/Back-end support for HiPath ProCenter Agile V7: an issue on datasheets ?)
m
 
Line 1: Line 1:
 
Hi Bossekr,<br/>
 
Hi Bossekr,<br/>
does actually [[DLI|HiPath DLI]] supports only the deployment of '''HFA''' (CorNet IP) system clients:<br/>
+
does actually [[HiPath DLI]] supports only the deployment of '''HFA''' (CorNet IP) system clients:<br/>
 
* Comfort Open P100 IP
 
* Comfort Open P100 IP
 
* Comfort Open P300 IP
 
* Comfort Open P300 IP
Line 20: Line 20:
 
* optiClient 130
 
* optiClient 130
 
without supporting their SIP variants ?<br/>
 
without supporting their SIP variants ?<br/>
Is it a ''design limit'' or a ''temporary lack'' of workpoints '''.xml''' ''templates'' on the [[DLI|HiPath DLI]] side ?<br/>
+
Is it a ''design limit'' or a ''temporary lack'' of workpoints [[XML]] templates on the [[HiPath DLI]] side ?<br/>
 
Should this means that [[DLS|HiPath DLS]] is, in the while, still needed on HiPath system IVM equipped with a mass (or a mix) of SIP workpoints connected ?<br/>
 
Should this means that [[DLS|HiPath DLS]] is, in the while, still needed on HiPath system IVM equipped with a mass (or a mix) of SIP workpoints connected ?<br/>
 
regards,<br/>
 
regards,<br/>

Latest revision as of 11:48, 4 September 2007

Hi Bossekr,
does actually HiPath DLI supports only the deployment of HFA (CorNet IP) system clients:

  • Comfort Open P100 IP
  • Comfort Open P300 IP
  • OpenStage 20
  • OpenStage 40
  • OpenStage 60
  • OpenStage 80
  • optiPoint 410 entry
  • optiPoint 410 economy
  • optiPoint 410 economy plus
  • optiPoint 410 standard
  • optiPoint 410 advance
  • optiPoint 420 economy
  • optiPoint 420 economy plus
  • optiPoint 420 standard
  • optiPoint 420 advance
  • optiPoint 600 office V5
  • optiPoint WL2 professional
  • optiClient 130

without supporting their SIP variants ?
Is it a design limit or a temporary lack of workpoints XML templates on the HiPath DLI side ?
Should this means that HiPath DLS is, in the while, still needed on HiPath system IVM equipped with a mass (or a mix) of SIP workpoints connected ?
regards,
User:Davide.poletto Kimera 23:04, 7 August 2007 (CEST)


Hi all,
what's about Front-end/Back-end support of Xpressions Compact V2.5/V3.0 for HiPath ProCenter Agile V7 ?
Have a look at this HiPath-Forum thread for further references.
regards,
User:Davide.poletto Kimera 00:43, 30 August 2007 (CEST)