Views

Difference between revisions of "OpenScape Desk Phone CP700X Easy Deployment"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(1) WLAN discovery)
(2) Pre-Configuration using LAN connection)
Line 28: Line 28:
  
 
== 2) Pre-Configuration using LAN connection ==
 
== 2) Pre-Configuration using LAN connection ==
 +
 +
The OpenScape Desk Phone CP700X is equipped with a LAN switch like all other model of the family. The device has the same capabilities and performs the same action as all other family members as soon as a LAN cable is connected.
 +
 +
In that case the WiFi connection is automatically switched off and a fall back to OpenScape Desk Phone CP phone is done. All features known from the rest of the family are also applicable to the CP700X in that mode.
  
 
== 3) Deployment Service ==
 
== 3) Deployment Service ==
  
 
Deployment_Service
 
Deployment_Service

Revision as of 16:01, 3 February 2021

Easy Deployment in Detail

This is a short introduction to the OpenScape Desk Phone CP700X Easy deployment feature

The easy deployment process consists of three phases:

  • WLAN discovery (optional)
  • Pre-Configuration using LAN connection (optional)
  • Deployment service discovery
  • Manual Configuration

1) WLAN discovery

The WLAN discovery process is initiated when a phone starts up and does not have any WLAN systems configured and no LAN connection is provided (see 2). In this case, it will try to connect to a predefined WLAN with the following configuration:

  • SSID: AWS-INIT
  • Security key: WPA-PSK / WPA2-PSK
  • WPA-PSK passphrase: AWS-INIT

All other network parameters are at their default settings, which mean:

  • DHCP mode: On
  • 802.11 protocol: 802.11b/g/n
  • 802.11b/g/n channels: 1,6,11
  • World mode regulatory domain: World mode (802.11d)

If the phone has not successfully connected to this WLAN within ten seconds, it will continue to try to connect for ten seconds again until one succeeds.

This process can also be interrupted by configuring the phone either through the local admin menu (see 4) or through the Deployment server (see 3). As soon as one of the Networks A-D has a SSID filled in, probing of AWS-INIT will stop.

2) Pre-Configuration using LAN connection

The OpenScape Desk Phone CP700X is equipped with a LAN switch like all other model of the family. The device has the same capabilities and performs the same action as all other family members as soon as a LAN cable is connected.

In that case the WiFi connection is automatically switched off and a fall back to OpenScape Desk Phone CP phone is done. All features known from the rest of the family are also applicable to the CP700X in that mode.

3) Deployment Service

Deployment_Service