Views

Difference between revisions of "OpenScape Cordless IP V2"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
Line 89: Line 89:
 
The figure contains an overview of the protocols used between the DECT handsets, DECT IP base stations, OpenScape Cordless IP V2 software and the Communication Server.
 
The figure contains an overview of the protocols used between the DECT handsets, DECT IP base stations, OpenScape Cordless IP V2 software and the Communication Server.
  
 +
The following is an overview of the communication relationships used in the solution:
 +
 +
DECT handset - user: DECT handset, with alternative headset or Bluetooth headset
 +
 +
DECT handset – DECT IP base station (BSIP2): A call can be handed over seamlessly between the DECT IP base stations.
 +
 +
DECT IP base station (BSIP2) – DECT IP base station (BSIP2): Accurate time synchronization between the DECT IP base stations is vital for a seamless call handover.
 +
 +
DECT IP base station (BSIP2) – DECT Manager SW: The DECT IP base stations all communicate with the DECT Manager software; the signaling data is transported in this connection. The connection protocol between the DECT IP base stations and the DECT Manager Software is system specific; it is IP-based and uses UDP packages in both directions.
 +
 +
DECT Manager  software – Communication Server: The SIP protocol between the DECT Manager software and Communication Server is standards-based
 +
Integrator software - time server: A time server is  not absolutely necessary. The time information is used to display this when the DECT handset is idle and to file the caller list with correct data. The Communication Server can also be managed as a time server.
  
  

Revision as of 10:05, 7 December 2017

OpenScape Cordless IP V2 is the DECT over IP solution for pure and hybrid Unify IP platforms.

The radio technology used in the OpenScape Cordless IP V2 solution complies with the DECT (Digital Enhanced Cordless Telecommunications) standard. The OpenScape Cordless IP V2 solution makes the DECT standard already established for mobile voice communications also available in Voice over IP infrastructures. The entire radio range managed by the system consists of DECT IP base stations that either together form a seamless network of overlapping and synchronous radio cells or individual islands of radio signals. The size of a radio cell depends on local conditions. The connection to the Voice over IP infrastructure is made by means of the SIP protocol. This means that DECT radio cells are the perfect way to supplement SIP-capable Voice over IP systems as mobile communication solutions. DECT IP base stations support the seamless handover of existing voice connections, in other words the changeover between the radio cell and a DECT handset during a call. In addition, the roaming function is made available to mobile users, i.e. the change of radio system without an existing call.

Key Features

Homepage OpenScape Cordless IP V2 picture.png

The entire radio range managed by the system consists of DECT IP base stations that either together form a seamless network of overlapping and synchronous radio cells or individual islands of radio signals. The size of a radio cell depends on local conditions.

DECT IP base stations support the seamless handover of existing voice connections, in other words the changeover between the radio cell and a DECT handset during a call. In addition, the roaming function is made available to mobile users, i.e. the change of radio system without an existing call.

Solution Components

The OpenScape Cordless IP V2 system solution consists of the following main components:

  • Handset: DECT handsets with PN-CAP functionality
  • Base station: DECT IP base station with PN-CAP/GAP functionality for the DECT handsets and IP interface with the Ethernet network
  • OpenScape Cordless IP V2 software (DECT Manager and Integrator) is the central software component for:
    • controlling the DECT IP base stations
    • implementing the SIP/RTP interfaces in the direction of the Communication Server
    • central administration and configuration of the entire OpenScape Cordless IP V2 solution

The DECT Manager SW can run either on an active DECT IP base station (small solution) or on a DECT IP base station with deactivated DECT part (medium Solution).

The Integrator SW runs either together with the DECT Manager on a base station (small and medium solution) or separate on a virtual server (large solution)

Overview

This section gives you an overview over the most important features of OpenScape Cordless IP V2.


DECT IP base station (BSIP2)

BSIP2 picture.jpg

DECT IP base stations form a network of radio cells and conduct communications with the handsets. If these radio cells overlap and are synchronized, the DECT handsets can move between the radio cells with an existing voice connection. The best location for the DECT IP base stations for radio coverage in a building or site is determined by means of radio measurement. Special antennae can be used for increased radio ranges. The DECT IP base stations can be fitted with an outdoor casing to protect against inclement weather. DECT IP base stations have the complete software for DECT and IP functionality. This software does not need to be configured and administered locally on the DECT IP base stations; this can be conveniently implemented on a centralized basis by means of the OpenScape Cordless IP V2 software.

OpenScape Cordless IP V2 Software (DECT Manager and Integrator)

The DECT Manager software has several functions, exists once (small and medium solution) or multiple times (large solution) in the system and can be activated on one of the DECT IP base stations.

Function: Router and protocol converter

The DECT Manager software is the interface between the IP DECT base stations on the one hand and the Communication Server on the other. It has a router and protocol converter function whereby it controls the voice connections between the Communication Server and the relevant DECT IP base station and also converts these into a data format that can be used by the DECT base stations.

Only the DECT Manager knows the DECT IP base stations with which the relevant handsets are associated; this is not apparent to the Communication Server. The DECT Manager software is a Gateway User agent for the Communication Server which manages the configured handsets. The DECT Manager software is also used to register all handsets on the Communication Server; this software administers the login procedure and the active DECT handsets.

The Integrator SW exists only once in the system and runs in small and medium solution together with the DECT Manager on one of the DECT IP base stations, in the large solution on a virtual server under VMWare.

Function: Configuration and administration interface

All administration and configuration of DECT IP base stations and OpenScape Cordless IP V2 software itself is executed by means of the web-based management of Integrator software.

Function: Synchronization management

In DECT systems with a circuit-switched connection, e.g. OpenScape Cordless Enterprise/Office systems, the synchronization information required to synchronize the base stations is derived from the UP0 connection. This is not possible in the case of the OpenScape Cordless IP V2system. However, accurate time synchronization between the DECT IP base stations is vital for a seamless call handover.

A seamless handover cluster is formed between synchronous DECT IP base stations; calls can only be handed over seamlessly in this cluster. More clusters of this type are possible for each Communication Server, however these are not synchronized with each other. Seamless handover is not possible between different non-synchronous clusters.

Synchronization via DECT (radio synchronization) In order to synchronize with another DECT IP base station via the DECT interface, a DECT IP base station must be within the overlap area of the radio cell that forms this DECT IP base station.

In addition, the DECT IP base station can be synchronized on other DECT IP base stations, which increases the availability of synchronicity in this cluster. In the event that synchronicity is lost, this DECT IP base station no longer accepts calls. After all ongoing calls on the asynchronous DECT IP base station have been ended, an attempt is made to resynchronize this DECT IP base station. Only then can new calls be made on this DECT IP base station.

Synchronization via LAN

In contrast to an air based synchronization mechanisms, synchronization via Ethernet (acc. IEEE1588, PTP Precious Time Protocol) requires less configuration.

On the other hand, great demands are made on the Ethernet characteristics like symmetry, packet loss, delay, jitter (variance of delay). Therefore special requirements regarding the Ethernet components (especially the Ethernet switches used) have to be considered. Exceeding of limits (especially of jitter) will lead to loss of synchronization, which will finally lead to a resynchronization process. During this process the belonging base stations are unable to establish telephony connections.

The LAN synchronization solely uses a star shaped topology. Maximally one base station serves a Synchronization Master, all other base stations which participate at the synchronization serve as Synchronization Slaves.

The main advantages of synchronization via LAN are:

  • more flexibility in the location of the DECT IP base station - no need to built synchronization chains as with synchronization via DECT,
  • less DECT IP base stations are required, because the overlapped area of DECT IP base station is less,
  • configuration of DECT IP systems is simplified, because all DECT IP base stations can be synchronized to only one synchronization master

Communication Interfaces

OpenScape Cordless IP V2 interface.jpg

The figure contains an overview of the protocols used between the DECT handsets, DECT IP base stations, OpenScape Cordless IP V2 software and the Communication Server.

The following is an overview of the communication relationships used in the solution:

DECT handset - user: DECT handset, with alternative headset or Bluetooth headset

DECT handset – DECT IP base station (BSIP2): A call can be handed over seamlessly between the DECT IP base stations.

DECT IP base station (BSIP2) – DECT IP base station (BSIP2): Accurate time synchronization between the DECT IP base stations is vital for a seamless call handover.

DECT IP base station (BSIP2) – DECT Manager SW: The DECT IP base stations all communicate with the DECT Manager software; the signaling data is transported in this connection. The connection protocol between the DECT IP base stations and the DECT Manager Software is system specific; it is IP-based and uses UDP packages in both directions.

DECT Manager software – Communication Server: The SIP protocol between the DECT Manager software and Communication Server is standards-based Integrator software - time server: A time server is not absolutely necessary. The time information is used to display this when the DECT handset is idle and to file the caller list with correct data. The Communication Server can also be managed as a time server.


Documentation and Training

End User License Agreement EULA