OpenScape CP600 Feature Example Videos ENG

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 14:32, 19 September 2017 by René Koritsch (talk | contribs) (Intuitive search function)
Jump to: navigation, search

CP600 SIP Feature example Videos

Short videos (max 60 seconds)

By pressing the "Expand" button, you will be presented with a sample scenario + video.

V1 R1


Introduction of the new Innovative Conversation Concept. LDAP, Exchange, Call History are combined into a dynamic conversation. There is only one conversation per participant under which all relevant data are summarized

1. Idle Screen is visible

2. The conversation shows all contacts sorted by their last interaction. For a quick overview, the last interaction is displayed by means of a symbol as well as the corresponding text. (outgoing call, missed call etc..).

3. The user can use the up and down button to navigate through the conversation

4. A longpress jumps to the beginning or end of the list

5. By pressing the right arrow key you can see more details. The last 3 interactions are displayed on the left side of the screen.

6. The "History" shows you the complete call history in a clear way.

7. the circle symbol indicate further information's (eg. call forwarding details). User can toggle the information via OK press.


requirement: Canonical settings

Bluetooth Proximity

With the help of the extended Bluetooth interface, it is possible to automatically lock the device as well as to unlock it. The signal strength of the Bluetooth device is measured for this purpose. If this value falls below a certain value which is configurable, the device is automatically disabled.

1. paired Bluetooth device is visible

2. User switches to the bluetooth configuration menu

3. proximity Monitoring will be activated It is also possible to change the proximity Treshold

4. With a long press, the user gets to the top configuration option and saves the configuration's

5. User switches to the main menu screen (Bluetooth device is connected)

6. The user leaves his workstation with the headset and the device is automatically locked.

7. The user returns and the device is automatically unlocked


requirement: Bluetooth

Delete all Conversations

Over 3 clicks, it is possible to delete all conversations at the same time

1. The idle screen of the device is displayed.

2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.

3. The function "Delete all Conversations" is selected

4. If a user PW is set up, this must be entered

5. The Device automatically switches to the conversation screen. All conversations are deleted.


requirement: nothing

Intuitive dial out

Already during the dialing the user is shown in the real time all phone numbers relevant conversations on the display. This saves time and simplifies the choice.

1. Idle Screen is visible

2. The user begins to dial the desired number. Immediately all the contacts are scanned in real time and displayed accordingly for the user. Each additional digits further restricts the search

3. the requested contact (XXX23) is displayed at the top position after the fourth digit


requirement: Canonical settings


Automatic synchronization of the Exchange contacts (eg Microsoft Outlook) to the device. Thus, their contacts in the device are always up-do-date. Existing contacts are automatically supplemented by Exchange information.

1. Contact list with an unknown number (XX21913) is displayed

2. The details of the contact show only the phone number

3. Exchange synchronization starts and the conversation is dynamically updated

4. From the previously unknown number XX21913 becomes a complete entry with corresponding picture and contact information. The call history is, of course, not lost.


requirement: Exchange , Canonical settings

Intuitive search function

The search function has been completely redesigned to give the user an intuitive and easy way to search for both local and corporate contacts at the same time. The local search results are displayed, followed by the company entries (LDAP)

1. the last 4 conversations are displayed

2. The user selects the search field and starts the search (press OK button). In the local search, both the first and the last name are searched at the same time.

3. Any input from the user restricts the results further.

4. New conversations can be seen very well with the text "Start new conversation" as well as the missing interaction time.


requirement:Canonical settings, optional LDAP

Real time LDAP

Dialed / incoming phone numbers are automatically synchronized with the corporate directory.

1. The example shows a completely empty conversation list

2. The user dials the previously unknown numbers 32117. The device automatically sends a request for these numbers to the company directory (LDAP). If a hit occurs, all relevant contact information is immediately updated.

3. In this case, the contact picture is automatically downloaded from the configured LDAP server and displayed.

4. After terminating the conversation, the contact is automatically stored locally by the device

5. By pressing the right arrow key, the user enters the local conversation details and can retrieve all existing corporate directory information.


requirement: Canonical Settings, LDAP

V1 R2

Circuit Mode

Easy switch between normal and circuit mode

1. The conversation screen is displayed (Phone mode is active)

2. By selecting the conversation line and pressing the OK key, the user accesses the conversation list options.

3. Pressing the OK key activates the circuit mode. The device now synchronizes itself automatically with the configured Server. The circuit conversations are displayed. The local conversations are no longer displayed in this mode.

4. Subsequently, the user returns to the telephone mode in the same way.


requirement: Circuit

CP600 12 favorites

When the key-module is disconnected, the user is now able to configure up to 12 favorites.

1. The idle screen of the phone is displayed, including favorites.

2. Press the OK button to enter the user's favorite menu. All configured favorites are displayed here

3. The user selects the favorite line and enters the configuration menu by pressing the OK key

4. In this menu it is possible to program up to 12 individual keys.

5. By pressing the OK button, the user enters the configuration menu. Button 12 is used with "Forwarding all calls" function.

6. After successful configuration the user automatically reaches his current favorites


requirement: nothing

Mark all conversations as read

Over 3 clicks, it is possible to Mark all conversations as read at the same time

1. The idle screen of the device with 4 missed calls is displayed.

2. The user switches to the conversation screen.

3. By selecting the conversation line and pressing the OK key, the user accesses the list options

4. The function "Mark missed calls as read" is selected. Press the OK key to execute the function.

5. The device automatically switches to the conversation screen and marks all conversations as read.


requirement: nothing

NTP Backup

If the device can not reach the configured NTP (time) server, a fault message is displayed on the display. In addition, it is possible to configure a backup NTP server.

1. The current NTP server can not be reached. Therefore, an error message is displayed for the user.

2. From the Admin menu it is possible to configure a second (backup) NTP server (also via DLS and WBM)

3. The device contacts the newly configured time server (background process)

4. The second NTP server is reachable and transmits the current time. The error message for the user disappears.


requirement: Backup NTP

Idle Screen

After a configurable timeout, the device automatically displays the configured idle screen.

1. Conversation screen is visible

2 After the configured timeout, the device automatically switches to the configured idle screen. In this case, the idle screen is configured to "Menu screen"


requirement: Idle Screen

V1 R3

Landing Screen

The user can set the landing screen individually.

1. Settings menu is visible

2. the configuration menu can be accessed via the menu settings / Phone / Idle Screen

3. the user is given a selection list of the available landing screens by selecting and then pressing the OK button

4. after successful configuration the settings are stored (main menu)

5. the conversation screen is visible

6. outgoing call to XX224

7. after terminating the call, the device automatically switches to the configured landing screen


requirement: Landing Screen

Permanent LDAP Lookup

If activated, an LDAP request is also sent for existing contacts.

1. Conversation screen with local LDAP contacts is displayed

2. User selects the conversation "Stefan Siewert" and starts an outgoing call (OK press)

3. The device sends an LDAP request to the server despite the existing contact information. If the server can resolve the LDAP contact, the existing contact is dynamically updated (in this case, the contact image is updated)

4. After the call has ended, the device displays the conversations with the updated image


requirement: LDAP, permanent LDAP, Canonical Settings