Views

OpenScape Business Interfaces

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 10:54, 29 November 2013 by Wmenn (talk | contribs) (Microsoft TAPI)
Jump to: navigation, search


Overview

OpenScape Business offers different types of Open Interfaces which can be used for integration of OpenScape Business features into applications and IT landscapes.

For access to Telefony Function serveral protocols and API´s are available

  • CSTA protocol
  • WebService Interface protocol
  • Call Data Records Interface protocol
  • First and third party TAPI Telephony Service Providers

Interface descriptions of this site refer to OpenScape Buisness V1.

Physical interfaces

  • LAN Ethernet 10/100 base T
  • Upo E(OpenScape Office X3,X5 and X8)
  • S0 / S2m (OpenScape Office X3,X5 and X8)
  • a/b (OpenScape Office X3,X5 and X8)

Protocols

Web Services Interface (HTTP / HTTPS)

The realization of the HTTP(S) protocol is done by the WebServices.

The WebServices are fully integrated into HiPath OpenScape Business V1 software. No SW download and no external PC are required for use of the WebServices. Administration is done by Web Based Administration (WBM) of OpenScape Business.

Documentation Version / Date File Disclaimer

OpenScape Business V1

Web Services Interface Manual

V1.0 / Not yet available --- Coming soon

pdf.png  OSBizV1_WSI

You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file.

Any support regarding the WebServices interface implemtation is only be given to registered partners within the Technology Partner Program

CSTA protocol

The CSTA protocol enables the connection of high-performance CTI, Contact Centre and Unified Communication applications etc. to OpenScape Business. It supports:

  • Access via Ethernet LAN (TCP / IP)
  • CSTA Phase III ASN.1 encoded by:
    • ECMA-269 Services for Computer Supported Telecommunications Applications (CSTA) Phase III
    • ECMA-285 Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III* Wide range of system telephones
  • Network-wide monitoring and control of all resources
  • Multiplexing of monitor points

Differences between OpenScape Business CSTA and HiPath 3000 CSTA implementation

The CSTA implementation of OpenScape Business V1 has been refined. Regarding to the HiPath 3000 implementation the following has to be considered.

General modifications

  • Physical access
    • CSTA protocol is available exclusively via Ethernet LAN connection
    • Access via port 8800 (per default).
    • RS 232 and S0 interfaces are no longer supported.
  • Interface enabling
    • CSTA Interface is disabled per factory default. It has to be enabled explicitly before use.
    • CSTA Login credentials have to be configured individually.*
  • Interface configuration
    • CSTA Plus products flags are set fixed to
    • Dial prefixes are always transferred with the call number
    • Enhanced CSTA-CAUSE handling is always active
    • CSTA CSP signaling is always active
    • MULAP Monitoring is always active
    • CTI Networking always active
    • Open Scape Contact Center Flag is always inactive.
    • Modification of flags via system administration is no longer supported.

Capacities

  • Max. 4 CSTA links are available for “external” applications.

Within factory default one CSTA link is always available.3 additional CSTA links can be enabled optionally, if not used by embedded applications of the system.

Protocol Modifications

  • No longer support of CSTA Phase II protocol version
  • Service enhancements regarding:
    • Configuration data
    • Networking

Networking

  • Native support of networked systems of the same SW version. HiPath 5000 RSM and CSP are no longer required

Prerequisites

  • “UC-Booster Card” or “UC-Booster Server” is required for use of the CSTA interface

Please note
It is strongly recommended to re-test applications which have been developed for HiPath 3000 in combination with OpenScape Business.

CSTA interface manual

The CSTA interface manual of OpenScape Business consists out of 4 parts, which are zipped together into one file.

Part 1 ECMA-269 related
Part 2 ECMA-285 related
Part 3 ECMA-TR/82 related
Part 4 Escape Services (available with OSBiz V1R2.1 (Fix Release 1) or higher)

Documentation Version / Date File Disclaimer

OpenScape Business V1

CSTA Interface Manual

V1.0 / 04.04.2011

zip.png  OSBizV1_CSTA

You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file.

Any support regarding the CSTA implemtation is only be given to registered partners within the http://www.unify.com/us/partners/technology-partner.aspx

Proprietary protocol for CDR-Transmission

OpenScape Business collects data about outbound (incoming and outgoing) calls within an internal file.

This file can be transmitted via Ethernet LAN to external computers. To avoid inconsistencies by multiple transmission of the same file, the file should be deleted after transmission. More information about the handling, link establishing and the call data record content is given within the following document. An asynchonous transfer of single data records, as HiPath 3000 does, is not supported by OpenScape Office LX/MX.


Documentation Version / Date File Remark

OpenScape Business V1

CDR Transmission

Axxxxx-Pyyyy-Tzzz-1-18

0x/2011

pdf.png  OSBizV1CDR

This document is only available in English language

Application Interfaces

Microsoft TAPI

Many CTI and CRM applications on the market use the Microsoft TAPI interface for connecting to the telephone system. With OpenScape Business TAPI 120 V1 and OpenScape Business TAPI 170 V1, two new and powerful TAPI Service Providers (TSP), which are optimized for the system architecture and network topology of OpenScape Business, are now available for connecting TAPI-based applications in addition to the CallBridge Collection.

The choice of the appropriate TAPI Service Provider essentially depends on the number of client PCs to be connected with TAPI applications as well as the existing IT infrastructure and the phone devices used.


is used as a traditional first-party TAPI Service Provider on system terminals that have a LAN or USB interface. It is suitable for installations with just a few PCs. A LAN is not necessary for the operation of the CallBridge Collection. The CallBridge Collection is installed on each PC that is running a TAPI application. Analog, Cordless and system devices without USB/IP interfaces are not supported. TAPI connections via the CallBridge Collection are not licensed.

is a system centric first-party TAPI Service Provider. It is the preferred TAPI Services Provider for OpenScape Business and can be used in Microsoft networks with or without a domain controller. It supports analog and Cordless devices as well as system devices with or without USB or IP interface. The TAPI 120 Service Provider is installed on each PC client that is running a TAPI application. Connections via TAPI 120 are subject to licensing within OpenScape Business. The connection to OpenScape Business is done via Ethernet LAN. Only one CSTA link is required, regardless of how many TAPI 120 clients are being operated.

is a classic "third-party" TAPI Service Provider that is installed on a server on the LAN and connected centrally to the OpenScape Business System. TAPI 170 can be used as an alternative to TAPI 120 if there is a domain controller in the Microsoft network. When using the so-called remote TAPI function, it is not necessary to install the TAPI Service Provider on the client PCs. This offers significant time savings in installations with many client PCs.
Please note, however, that the use of OpenScape Business TAPI 170 is mandatory in the following constellations:

  • Connection of TAPI stations in networked OpenScape Business systems when the TAPI stations are located in different nodes.
  • Connection to TAPI applications running on a terminal server
  • Connection to server-based TAPI applications

OpenScape Business TAPI 170 is subject to licensing within OpenScape Business. To connect to OpenScape Business, one CSTA link is required, regardless of how many TAPI 170 stations are being operated.


TAPI 120 and 170 is connected to OpenScape Office LX/MX via LAN interface . Callbridge Collection is connected directly to OpenStage phones using USB or LAN interface.

Manufacturer specific implementations are described within these documents.


Documentation Version / Date File Disclaimer

TAPI Application Developer´s Guide

OpenScape Buisness TAPI 170 V1.0

V1.0 / dd.mm.yyyy

pdf.png  TAPI170 Developers Guide

You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file.

Any support regarding the TAPI implentation is only be given to registered partners within the HiPath Technologie Partner Program

CallBridge Collection


CorNet TS TAPI Service Provider

Supplement to the Microsoft Windows Telephony Application Programmer's Guide Version 2.0

V2.0 / November 2004

zip.png  CBV2_PG

You may download and use this file only if you agree to the DISCLAIMER. If You disagree, your are not allowed to download the file.

Any support regarding the TAPI implentation is only be given to registered partners within the HiPath Technologie Partner Program