Views

How to connect openStage 60/80 to ODS

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 16:13, 8 December 2011 by Wmenn (talk | contribs) (Access to ODS LDAP Server)
Jump to: navigation, search

Error creating thumbnail: File missing


Preface

This How To describes the connection of OpenStage 60 or 80 device to the Open Directory Service.

It is written based on OSO version V3R2. Deviations may occur, if higher versions are used.

Only the ODS relevant setting are described here. For general OpenStage LDAP configuration issues have a look at:

All data shown here and also the screenshots are examples only, which are used to demonstrate the capabilities.

Prerequisites

Before you start, you have to check some prerequisites otherwise the connection fails.

  • Fully installed and operational OSO system
  • ODS is active within the OSO system
  • ODS is successfully connected to an external database
  • OpenStage 60/80 (HFA) phone is conneced to OSO
  • IP address of the OpenStage phone

Configuration of OpenStage 60

Within the following the configuration of an openStage 60 phone is described without using an deployment server.


For configuration the Web-Based Management of openStage 60/80 is used.

After typing in https://OS-ip-address into a Internet browser,the web based managemnet of the phone is opened. (OS-ip-address is used here a placehoder for the ip-address of the phone. Select administration mode and enter the appropriate password.

Access to ODS LDAP Server

In a first step the access date for the OSD LDAP server must be entered. Cherfore choose "Local functions" --> "LDAP settings" from the menue

OS60 LDAP ODS1.png

and type in the access data for the ODS LDAP Server as shown in the next picture.

OS60 LDAP ODS2.png

Do not forget to replace IP address etc. with the real values. User name and password are those, which were defined within the ODS LDAP configuration.

Create LDAP Template for ODS

In a second step a LDAP template for ODS has to be created.

The template has to be created in a simple text editor as a plain text file, which contains the following assignment

OS60 LDAP ODS3.png

The file must be stored with txt as file extention. E.G. ODS_OS60_LDAP.txt


Upload LDAP Template into OpenStage Phone

In the third step the OpenStage Phone has to download the file from an FTP server. To do so the following action are necessary.

  • Setup an FTP server if no FTP server is at hand
  • Upload file to the FTP server
  • Administrate phone settings to access the FTP server
  • Perfom file download


is to upload the LDAP template into the openStage Phone. To do so a FTP Server is required. OpenStage cuired

OS60 LDAP ODS4.png

OS60 LDAP ODS5.png

OS60 LDAP ODS6.png