Views

How to connect OpenScape Business to LDAP Server

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Revision as of 12:58, 4 September 2014 by Wmenn (talk | contribs)
Jump to: navigation, search


Preface

This How To describes the connection of OpenScape Business to LDAP server. Information given here should help to understanding the configuration in general. The examples given here demonstrate the connection to a Microsoft Active Directory and to the embedded Open Directory Service. All data shown here and also the screenshots are examples only, which are used to demonstrate the capabilities.
Note
The following examples are based on OpenScape Business V1.R3. Deviation may occur in later versions.


General Information

OpenScape Business offers two different ways to connect to a LDAP server:

  • System LDAP connection
  • UC Suite LDAP connection

Each LDAP connection enables different LDAP clients, which are connected to OpenScape Business to access the retrieved data.

System LDAP connection

UC Suite LDAP connection

LDAP connection to a Microsoft Active Directory


The following example values are used in this manual: LDAP server ip-address: 198.6.127.33 Administrator username: administrator@win2k8dom.net Domain name: win2k8dom.net






Prerequisites

Before you start, you have to check some prerequisites otherwise the connection fails.

  • Fully installed and operational OSO system
  • ODS is active within the OSO system
  • ODS is successfully connected to an external database

UC Suite LDAP Client Settings 

My Portal and myPortal for Outlook can also search data in external directories, which are connected to the ODS.

To do so you have to configure the LDAP connection of the UC Suite within the OpenScape Office system in the way that points to the ODS.

At first you have to open the Administration Portal of OpenScape office, choose the expert mode and selct the UC Suite configuration.

A left mouse click to "UC Suite" opens the configuration dialog. Selection of "External Provider config" opens the Dialog for LDAP server configuration. Another mouse click to the "Add" button grants access to the creation of a new LDAP connection. The following settings have to be entered.


OSO LDAP ODS 3.png


Parameter Value / Remark

Name:

This name describes the LDAP connection.

Server:

IP Adress of the OSO system in which the ODS is located.

Within OSO LX/MX single node systems

local.ldap

should be used as server address. This name is internally resolved and directed to the correct IP address of the ODS.

Note: This does not apply for network scenarios. In this case the IP address of system, which operates the ODS has to be entered.

Port: Port of the ODS LDAP Server (Default is 389)
LDAP Base Distinguehed Name This parameter has to be set to

dc=web

User name: For access from OSO myPortal Client the User Name must be set to:

uid=uc,dc=web

regardless the settings within the ODS configuration. This setting ensures, that the OSO internal entries are filtered by ODS and that they are not shown twice. In case the filtering is not wanted,

uid=ldap,dc=web

has to be entered instead.

Password:

The password, which was assigned for the ODS LDAP Server login during the ODS configuration has to be entered here.




LDAP field mapping:
Afterwards the LDAP field of OSO UC myPortral/myPortal for Outlook clients must be mapped to the appropriate ODS LDAP fields. The mapping within the picture above shows the assignment.


All entries become effective within OSO after saving.