Views

Difference between revisions of "How to connect OpenScape Business to LDAP Server"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
(Example: System LDAP connection to Open Directory Service)
(Example: System LDAP connection to Open Directory Service)
Line 71: Line 71:
  
 
* Open Directory Service is running
 
* Open Directory Service is running
* Within Open Directory Service a specific field mapping called '''openstage''' has been configured
+
'''* Within Open Directory Service a specific field mapping called ''openstage'' has been configured'''
 
* Open Directory Service of the own system is used: IP address 127.0.0.1
 
* Open Directory Service of the own system is used: IP address 127.0.0.1
 
* Username: uid=ldap,dc=openstage
 
* Username: uid=ldap,dc=openstage

Revision as of 10:32, 5 September 2014


Preface

This How To describes the connection of OpenScape Business to LDAP server. Information given here should help to understand the configuration in general. The examples demonstrate the connection to a Microsoft Active Directory and to the embedded Open Directory Service. All shown data and screenshots are examples only, which are used to demonstrate the capabilities.
Note
Description refers to OpenScape Business V1R3. Deviations may occur in later versions.

General Information

OpenScape Business offers two different ways to connect to a LDAP server:

  • System LDAP connection
  • UC Suite LDAP connection

Each kind of LDAP connection enables different LDAP clients, which are connected to OpenScape Business, to access the retrieved data.

System LDAP connection

The system LDAP client allows searching for LDAP entries with HFA phones, selecting the search result and to use them to perform a call.
Note:
Only LDAP version 2 with authentication is supported.


The required configuration is done in the OpenScape Business Administration Portal

Expert Mode --> Telephony Server --> Basic Settings --> System --> LDAP

OpenScape Business System LDAP Settings

Within this dialog screen the following information have to be filled in at minimum to enable the System LDAP function

  • IP address of the LDAP server
  • Username
  • Password / Confirm password
  • Basic DN


In addition the phone display setting needs to be set in the OpenScape Business Administration Portal:

Expert Mode --> Telephony Server --> Basic Settings --> System --> Display

OpenScape Business Phone Display Settings for LDAP search

Set the value “Internal Phonebook” from “Internal” to “All”. After these settings are done the System LDAP search function is enabled at the HFA phones.
Use case:

  • Hook off HFA phone
  • Apply “Phonebook” *
  • Select the “LDAP” directory
  • Type a name with the keypad and apply the entered search string
  • Select the requested search result and apply the selected entry to perform a call


Example: System LDAP connection to Active Directory

Within this example the following is assumed:

  • IP address of the Active Directory LDAP server: 198.6.127.33
  • Username: Administrator@win2k8dom.net
  • Password / Confirm password: Password of the Administrator user
  • Basic DN: dc=win2k8dom,dc=net


OpenScape Business System LDAP settings for Active Directory access


Note:
Remote access to the Active Directory for OpenScape Business has to be granted by network administrator.

Example: System LDAP connection to Open Directory Service

Within this example the following is assumed:

  • Open Directory Service is running

* Within Open Directory Service a specific field mapping called openstage has been configured

  • Open Directory Service of the own system is used: IP address 127.0.0.1
  • Username: uid=ldap,dc=openstage
  • Password: / Confirm password: Password as configured within the Open Directory Service
  • Basic DN: dc=openstage



OpenScape Business System LDAP settings for Open Directory Service access


Note:
Remote access to the Active Directory for OpenScape Business has to be granted by network administrator

UC Suite LDAP connection

The UC Suite LDAP connection enables the UC Suite clients:

  • myPortal for Desktop
  • myPortsl for Outlook
  • myAttendant
  • myAgent

to perform caller identification and directory search within the directories of the connected LDAP Server.

The needed configuration is done in the OpenScape Office Assistant. Please navigate to this page to perform the changes in the OpenScape Office Assistant:

Expert Mode --> Application --> OpenScape Business UC Suite --> External Providers Config --> Contact Providers --> LDAP

Use the “Add” button to add a new LDAP configuration to the OpenScape Office:

OpenScape Business UC Suite LDAP Settings


Parameter Explanation

Parameter Value / Remark

Name:

This name describes the LDAP connection.

Server:

IP address of the LDAP Server.

In case, that the Open Directory Service is used as LDAP server,
local.ldap
should be entered as server address. This name is internally resolved and directed to the correct IP address of the Open Directory Service. This does not apply for networked scenarios. In this case the IP address of the system, which operates the Open Directory Service has to be entered.

Port: Port of the LDAP Server (Default is 389)
LDAP Base Distinguehed Name This parameter has to be set as configured within the LDAP server.

For OpenDirectory Service use: dc=web

User name: This parameter has to be set as configured within the LDAP server.

For OpenDirectory Service use: uid=uc,dc=web
regardless the settings within the ODS configuration. This setting ensures, that the OSO internal entries are filtered by ODS and that they are not shown twice.
In case the filtering is not wanted, use: uid=ldap,dc=web

Password:

The password has to be set as configured within the LDAP server.






LDAP field mapping:
Afterwards the LDAP field of OSO UC myPortral/myPortal for Outlook clients must be mapped to the appropriate ODS LDAP fields. The mapping within the picture above shows the assignment.


All entries become effective within OSO after saving.



LDAP connection to a Microsoft Active Directory


The following example values are used in this manual: LDAP server ip-address: 198.6.127.33 Administrator username: administrator@win2k8dom.net Domain name: win2k8dom.net

Prerequisites

Before you start, you have to check some prerequisites otherwise the connection fails.

  • Fully installed and operational OSO system
  • ODS is active within the OSO system
  • ODS is successfully connected to an external database

UC Suite LDAP Client Settings 

My Portal and myPortal for Outlook can also search data in external directories, which are connected to the ODS.

To do so you have to configure the LDAP connection of the UC Suite within the OpenScape Office system in the way that points to the ODS.

At first you have to open the Administration Portal of OpenScape office, choose the expert mode and selct the UC Suite configuration.

A left mouse click to "UC Suite" opens the configuration dialog. Selection of "External Provider config" opens the Dialog for LDAP server configuration. Another mouse click to the "Add" button grants access to the creation of a new LDAP connection. The following settings have to be entered.


OSO LDAP ODS 3.png


Example: UC Suite LDAP connection to Active Directory

Within this example the following is assumed:

  • IP address of the Active Directory LDAP server: 198.6.127.33
  • Username: Administrator@win2k8dom.net
  • Password / Confirm password: Password of the Administrator user
  • Basic DN: dc=win2k8dom,dc=net


OpenScape Business UC Suite LDAP settings for Active Directory access


Note:
Remote access to the Active Directory for OpenScape Business has to be granted by network administrator