Views

Difference between revisions of "HiPath Cordless IP - Server HW"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
 
(4 intermediate revisions by 2 users not shown)
Line 4: Line 4:
  
 
== Overview ==
 
== Overview ==
A dedicated Server is required to host the HiPath Cordless IP SW for larger configurations in regards to number of DECT IP base stations and number of Gigaset professional DECT phones.
 
The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even the HiPath Cordless IP SW runs on this dedicated Server.
 
  
The Server Operating System used with HiPath Cordless IP is the Linux derivate [[wpde:OpenWrt|OpenWrt]]. The Operating System is already part of the SW delivery CD with HiPath Cordless IP SW. This Operating System is preconfigured for the usage with the below mentioned Server (e.g. all the required driver are compiled into the Operation System). 
+
A dedicated Server hardware is required to host the HiPath Cordless IP Server appliance software in order to deploy a larger HiPath Cordless IP system (with an increased number of installed DECT IP Base Stations and/or an increased number of registered Gigaset/OpenStage S/SL Professional DECT phones).
Main advantage with this approach is the quick and easy installation process of the entire SW in the customer installations on the dedicated Server.  
+
 +
The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even if the HiPath Cordless IP Server runs on a dedicated Server hardware.  
  
== The following Server are provided and supported ==
+
The Server's Operating System used with HiPath Cordless IP is based on a Linux distribution for embedded device: [[wpen:OpenWrt|OpenWrt]].
  
=== Fujitsu Server TX 150 S7 ===
+
The Operating System forms part of the Software delivery CD-ROM (the HiPath Cordless IP Server): The Operating System came preconfigured for the usage with the below mentioned Fujitsu PRIMERGY hardware Server (e.g. all the required driver are already compiled into the Operation System).
special order number of this Server at Fujitsu: CUZ:1265V101-SEN04 <br>
 
If you change the motherboard of this Server please consider the special BIOS configuration for this Server:
 
  
Advanced
+
Main advantage with this approach is the quick and easy installation process of the entire HiPath Cordless IP Server software once the specified hardware Server is used.
  > Advanced System Configuration
 
      SATA Mode Selection:        [AHCI]
 
  
Server
+
Currently a Fujitsu RX100S8 server with special BIOS settings is required as the server for the HiPath Cordless IP Server SW. The Fujitsu server can be ordered in the same way as all other HiPath Cordless IP components.
    > Console Redirection
 
        Com Port Address:          [On-board COM A]
 
        Baud Rate:                [115.2K]
 
        Console Type:              [VT100]
 
        Flow Control:              [None]
 
        Continue C.R. after POST:  [Off]
 
Boot
 
  Boot priority order:
 
      1:  SATA 1: WDC WD2502ABYS-50B7A0-(S1)
 
      2:  SATA CD: HL-DT-ST DVDRAM GH40N-(S5)
 
  
This configuration is valid for BIOS version 1.16
+
If you change the Motherboard of the Fujitsu Server please consider to apply the correct BIOS configuration. In that case contact 
 +
[mailto:ulrich.mitreuter@unify.com product management]

Latest revision as of 11:46, 24 July 2014

Overview

A dedicated Server hardware is required to host the HiPath Cordless IP Server appliance software in order to deploy a larger HiPath Cordless IP system (with an increased number of installed DECT IP Base Stations and/or an increased number of registered Gigaset/OpenStage S/SL Professional DECT phones).

The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even if the HiPath Cordless IP Server runs on a dedicated Server hardware.

The Server's Operating System used with HiPath Cordless IP is based on a Linux distribution for embedded device: OpenWrt.

The Operating System forms part of the Software delivery CD-ROM (the HiPath Cordless IP Server): The Operating System came preconfigured for the usage with the below mentioned Fujitsu PRIMERGY hardware Server (e.g. all the required driver are already compiled into the Operation System).

Main advantage with this approach is the quick and easy installation process of the entire HiPath Cordless IP Server software once the specified hardware Server is used.

Currently a Fujitsu RX100S8 server with special BIOS settings is required as the server for the HiPath Cordless IP Server SW. The Fujitsu server can be ordered in the same way as all other HiPath Cordless IP components.

If you change the Motherboard of the Fujitsu Server please consider to apply the correct BIOS configuration. In that case contact product management