Views

Difference between revisions of "HiPath Cordless IP - Server HW"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (Some adaptations.)
Line 4: Line 4:
  
 
== Overview ==
 
== Overview ==
A dedicated Server is required to host the HiPath Cordless IP SW for larger configurations in regards to number of DECT IP base stations and number of Gigaset professional DECT phones.
 
The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even the HiPath Cordless IP SW runs on this dedicated Server.
 
  
The Server Operating System used with HiPath Cordless IP is the Linux derivate [[wpde:OpenWrt|OpenWrt]]. The Operating System is already part of the SW delivery CD with HiPath Cordless IP SW. This Operating System is preconfigured for the usage with the below mentioned Server (e.g. all the required driver are compiled into the Operation System). 
+
A dedicated Server hardware is required to host the HiPath Cordless IP Server appliance software in order to deploy a larger HiPath Cordless IP system (with an increased number of installed DECT IP Base Stations and/or an increased number of registered Gigaset/OpenStage S/SL Professional DECT phones).
Main advantage with this approach is the quick and easy installation process of the entire SW in the customer installations on the dedicated Server.  
+
 +
The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even if the HiPath Cordless IP Server runs on a dedicated Server hardware.  
  
== The following Server are provided and supported ==
+
The Server's Operating System used with HiPath Cordless IP is based on a Linux distribution for embedded device: [[wpen:OpenWrt|OpenWrt]].
  
=== Fujitsu Server RX 100 S7 ===
+
The Operating System forms part of the Software delivery CD-ROM (the HiPath Cordless IP Server): The Operating System came preconfigured for the usage with the below mentioned Fujitsu PRIMERGY hardware Server (e.g. all the required driver are already compiled into the Operation System).
==== Since beginning of February 2013 is this new Server released. ====
 
special order number of this Server at Fujitsu: CUZ:1385V203-SEN08 <br>
 
  
 +
Main advantage with this approach is the quick and easy installation process of the entire HiPath Cordless IP Server software once the specified hardware Server is used.
  
=== Fujitsu Server TX 150 S7 ===
+
== Fujitsu PRIMERGY RX/TX Server supported ==
==== The Phase Out of this Server has been started by Fujitsu. <br> ====
+
 
special order number of this Server at Fujitsu: CUZ:1265V101-SEN04 <br>
+
=== Fujitsu PRIMERGY RX100 S7 (released since February 2013) ===
If you change the motherboard of this Server please consider the special BIOS configuration for this Server:  
+
 
 +
Order Number of this Server at Fujitsu is CUZ:1385V203-SEN08<br>
 +
 
 +
=== Fujitsu PRIMERGY TX150 S7 (declared Phase Out by Fujitsu, superseded by TX150 S8) ===
 +
 
 +
Order Number of this Server at Fujitsu was CUZ:1265V101-SEN04<br>
 +
 
 +
If you change the Motherboard of this Fujitsu Server please consider to apply the BIOS configuration reported below:  
  
 
Advanced
 
Advanced
Line 37: Line 42:
 
       1:  SATA 1: WDC WD2502ABYS-50B7A0-(S1)
 
       1:  SATA 1: WDC WD2502ABYS-50B7A0-(S1)
 
       2:  SATA CD: HL-DT-ST DVDRAM GH40N-(S5)
 
       2:  SATA CD: HL-DT-ST DVDRAM GH40N-(S5)
 
+
<br>
This configuration is valid for BIOS version 1.16
+
This configuration is valid for BIOS version equal to 1.16.

Revision as of 09:22, 27 February 2013

Overview

A dedicated Server hardware is required to host the HiPath Cordless IP Server appliance software in order to deploy a larger HiPath Cordless IP system (with an increased number of installed DECT IP Base Stations and/or an increased number of registered Gigaset/OpenStage S/SL Professional DECT phones).

The features and requirements of HiPath Cordless IP (e.g. network requirements) are not changed even if the HiPath Cordless IP Server runs on a dedicated Server hardware.

The Server's Operating System used with HiPath Cordless IP is based on a Linux distribution for embedded device: OpenWrt.

The Operating System forms part of the Software delivery CD-ROM (the HiPath Cordless IP Server): The Operating System came preconfigured for the usage with the below mentioned Fujitsu PRIMERGY hardware Server (e.g. all the required driver are already compiled into the Operation System).

Main advantage with this approach is the quick and easy installation process of the entire HiPath Cordless IP Server software once the specified hardware Server is used.

Fujitsu PRIMERGY RX/TX Server supported

Fujitsu PRIMERGY RX100 S7 (released since February 2013)

Order Number of this Server at Fujitsu is CUZ:1385V203-SEN08

Fujitsu PRIMERGY TX150 S7 (declared Phase Out by Fujitsu, superseded by TX150 S8)

Order Number of this Server at Fujitsu was CUZ:1265V101-SEN04

If you change the Motherboard of this Fujitsu Server please consider to apply the BIOS configuration reported below:

Advanced

  > Advanced System Configuration
     SATA Mode Selection:         [AHCI]

Server

   > Console Redirection
       Com Port Address:          [On-board COM A]
       Baud Rate:                 [115.2K]
       Console Type:              [VT100]
       Flow Control:              [None]
       Continue C.R. after POST:  [Off]

Boot

  Boot priority order:
      1:  SATA 1: WDC WD2502ABYS-50B7A0-(S1)
      2:  SATA CD: HL-DT-ST DVDRAM GH40N-(S5)


This configuration is valid for BIOS version equal to 1.16.