Views

Difference between revisions of "HFA"

The Wiki of Unify contains information on clients and devices, communications systems and unified communications. - Unify GmbH & Co. KG is a Trademark Licensee of Siemens AG.

Jump to: navigation, search
m (See also / Siehe auch)
Line 4: Line 4:
  
 
'''HFA''' = '''H'''iPath '''F'''eature '''A'''ccess
 
'''HFA''' = '''H'''iPath '''F'''eature '''A'''ccess
 +
 +
== Explanation ==
 +
 +
The HFA ([[CorNet|CorNet IP]]) operating mode combines the advantage of an IP based workpoint with the comprehensive feature set of a HiPath communication platform.
 +
HFA workpoints are connected to the LAN by common Ethernet wires (if no [[PoE]]: additional power supply required), which is connected to a [[PBX]] by a gateway.
 +
By changing the telephone software a change-over from HFA to [[SIP]] is possible.
  
 
== Erläuterung ==
 
== Erläuterung ==
  
Die Betriebsart HFA ([[CorNet|CorNet IP]]) verbindet die Vorteile eines IP-basierten Workpoints mit den umfangreichen Leistungsmerkmalen einer [[HiPath]]-Kommunikationsplattform. HFA-Workpoints werden über übliche Ethernet-Kabel an das LAN angeschlossen (wenn nicht [[PoE]]: zusätzliche Stromversorgung erforderlich), das über ein Gateway mit einer [[PBX]] verbunden ist. Eine Umrüstung von HFA nach [[SIP]] ist durch Austausch der Firmware möglich.
+
Die Betriebsart HFA ([[CorNet|CorNet IP]]) verbindet die Vorteile eines IP-basierten Workpoints mit den umfangreichen Leistungsmerkmalen einer [[HiPath]]-Kommunikationsplattform. HFA-Workpoints werden über übliche Ethernet-Kabel an das LAN angeschlossen (wenn nicht [[PoE]]: zusätzliche Stromversorgung erforderlich), das über ein Gateway mit einer [[PBX]] verbunden ist. Eine Umrüstung von HFA nach [[SIP]] ist durch Austausch der Telefon-Software möglich.
  
 
== See also / Siehe auch ==
 
== See also / Siehe auch ==

Revision as of 07:05, 17 October 2007

HFA = HiPath Feature Access

Explanation

The HFA (CorNet IP) operating mode combines the advantage of an IP based workpoint with the comprehensive feature set of a HiPath communication platform. HFA workpoints are connected to the LAN by common Ethernet wires (if no PoE: additional power supply required), which is connected to a PBX by a gateway. By changing the telephone software a change-over from HFA to SIP is possible.

Erläuterung

Die Betriebsart HFA (CorNet IP) verbindet die Vorteile eines IP-basierten Workpoints mit den umfangreichen Leistungsmerkmalen einer HiPath-Kommunikationsplattform. HFA-Workpoints werden über übliche Ethernet-Kabel an das LAN angeschlossen (wenn nicht PoE: zusätzliche Stromversorgung erforderlich), das über ein Gateway mit einer PBX verbunden ist. Eine Umrüstung von HFA nach SIP ist durch Austausch der Telefon-Software möglich.

See also / Siehe auch