Davide.poletto: HiPath All-in-One V1.1: is the STMI2 module missing in the documentation ?

2007-03-29T15:25:03Z

HiPath All-in-One V1.1: is the STMI2 module missing in the documentation ?

New page

Hello,

I didn't found any specific reference about the requirement of a HiPath HG1500 V6.0 (STMI2) module on the HiPath All-in-One V1.1 (HAiO) documentation. 

Does anybody have an idea ? 

I think it should be mandatory in the HAiO integrated solution. 

IF the cPCI, that: 

* is a pure and separate PC just only mechanically hosted inside the HiPath 3800 V6.0 cabinet,
* and runs Microsoft Windows 2003 Server, HiPath ProCenter Agile V7.0 Call Center application, plus, co-resident the HiPath 5000 RSM

and IF the communication between the HiPath 3800 V6.0 and the cPCI happens only through connections to the same LAN segment then I think the HiPath 3800 V6.0 should have at least one HG1500 V6.0 (STMI2) module in order to have a LAN connection. 

Communications between HiPath applications and HiPath 3800 V6.0 couldn't be done through HiPath LIMS card or, eventually, through Xpressions Compact V2.0's LAN interface: these interfaces/modules should limit, should be unable or could be not certified to handle signalling due to their software/hardware specific architecture: 

* only about 400 BHCA in the case of LIMS card against the maxium of 2500 BHCA that HiPath ProCenter Agile V7.0 can reach.
* up to only 6 TAPI ports (connections) for communication to HiPath TAPI 120 V2.0 via LIMS; communication to HiPath TAPI 170 V2.0 not supported.
* use of Xpressions Compact card, once connected to the LAN segment, only to send, via an external SMTP Server, mails with voicebox message file attached.
* HiPath 5000 RSM doesn't communicate to LIMS, it communicate to HiPath HG1500 V6.0 (STMI2 Module). 

Best regards, 
[[User:Davide.poletto]] (Kimera 17:25, 29 March 2007 (CEST))

Talk:HiPath All-in-One - Revision history

Davide.poletto: HiPath All-in-One V1.1: is the STMI2 module missing in the documentation ?