SIP Port Example - Revision history

Martina.ganzer at 09:47, 7 December 2006

2006-12-07T09:47:41Z

Gunnar.boll at 11:10, 2 November 2006

2006-11-02T11:10:28Z

Christian.kaehler: Trace

2006-11-02T08:35:53Z

Trace

New page

SIP example:
* "Registrar IP address or DNS name: 192.168.1.63 Port=5066" : This is the destination port
* "SIP Port=5062" : This is the port used for sending and receiving on the phone side
* The port numbers in this example are not necessarily useful, but demostrate the possiblity of using asymmetric ports for source and destination (5062, 5066) or symmetric ports (if set to equal values).
* The phone is at 192.168.1.8
* The proxy is at 192.168.1.63

No. Time Source Destination Protocol Info
22 59.705702 192.168.1.8 192.168.1.63 SIP Request: REGISTER sip:192.168.1.63:5066;transport=udp

Frame 22 (495 bytes on wire, 495 bytes captured)
Ethernet II, Src: 192.168.1.8 (00:01:e3:24:05:ca), Dst: 192.168.1.63 (00:e0:00:5e:19:c0)
Internet Protocol, Src: 192.168.1.8 (192.168.1.8), Dst: 192.168.1.63 (192.168.1.63)
User Datagram Protocol, Src Port: '''5062''' (5062), Dst Port: '''5066''' (5066)
Source port: '''5062''' (5062)
Destination port: '''5066''' (5066)
Length: 461
Checksum: 0x3745 [correct]
Session Initiation Protocol
Request-Line: REGISTER sip:192.168.1.63:'''5066''';transport=udp SIP/2.0
Method: REGISTER
Resent Packet: False
Message Header
Max-Forwards: 70
Content-Length: 0
Via: SIP/2.0/UDP 192.168.1.8:'''5062''';branch=z9hG4bK90cd10ea5
Call-ID: 640b380ce00ee6f
From: 49894773001 <sip:49894773001@192.168.1.63>;tag=2c324ccecfd8e16;epid=SC2405ca
To: 49894773001 <sip:49894773001@192.168.1.63>
CSeq: 1 REGISTER
Contact: 49894773001 <sip:49894773001@192.168.1.8:'''5062''';transport=udp>;expires=3605
User-Agent: optiPoint 410_420/V6 6.0.60

No. Time Source Destination Protocol Info
23 59.709419 192.168.1.63 192.168.1.8 SIP Status: 200 OK (1 bindings)

Frame 23 (455 bytes on wire, 455 bytes captured)
Ethernet II, Src: 192.168.1.63 (00:e0:00:5e:19:c0), Dst: 192.168.1.8 (00:01:e3:24:05:ca)
Internet Protocol, Src: 192.168.1.63 (192.168.1.63), Dst: 192.168.1.8 (192.168.1.8)
User Datagram Protocol, Src Port: 5066 (5066), Dst Port: 5062 (5062)
Source port: 5066 (5066)
Destination port: 5062 (5062)
Length: 421
Checksum: 0xd7ce [correct]
Session Initiation Protocol
Status-Line: SIP/2.0 200 OK
Status-Code: 200
Resent Packet: False
Message Header
Call-ID: 640b380ce00ee6f
CSeq: 1 REGISTER
From: 49894773001 <sip:49894773001@192.168.1.63>;tag=2c324ccecfd8e16;epid=SC2405ca
To: 49894773001 <sip:49894773001@192.168.1.63>;tag=1d90e885136514d
Via: SIP/2.0/UDP 192.168.1.8:5062;branch=z9hG4bK90cd10ea5
Content-Length: 0
Contact: 49894773001 <sip:49894773001@192.168.1.8:'''5062''';transport=udp>;expires=3600

@@ Line 1: / Line 1: @@
-SIP example:
+[[SIP]] example:
 * "Registrar IP address or DNS name: 192.168.1.63 Port=5066" : This is the destination port
 * "SIP Port=5062" : This is the port used for sending and receiving on the phone side

@@ Line 2: / Line 2: @@
 * "Registrar IP address or DNS name: 192.168.1.63 Port=5066" : This is the destination port
 * "SIP Port=5062" : This is the port used for sending and receiving on the phone side
-* The port numbers in this example are not necessarily useful, but demostrate the possiblity of using asymmetric ports for source and destination (5062, 5066) or symmetric ports (if set to equal values).
+* The port numbers in this example are not necessarily useful, but demonstrate the possiblity of using asymmetric ports for source and destination (5062, 5066) or symmetric ports (if set to equal values).
 * The phone is at 192.168.1.8
 * The proxy is at 192.168.1.63